BHEL Artisan (Machinist) Syllabus 2026, Exam Pattern, Exam Date 2026
Detail Information about BHEL has published notification 2026 for the recruitment of Artisan (Machinist) vacancies. Those Candidates who are Interested to the following vacancy and completed all Eligibility Criteria can read the Notification & Apply Online. In this page we provide the Complete Syllabus of this Recruitment with Latest Update Exam Pattern and the Exam Date also.
ย
BHEL Artisan (Machinist) Syllabus 2026 - Overview
ย
| Conducting Body |
Bharat Heavy Electricals Limited (BHEL) |
| Post Name |
Artisan (Machinist) |
| Vacancy |
101 |
| Mode of Application |
Online |
| Exam Date 2026 |
11th December 2026 (Tentative) |
| Category |
Syllabus and Exam Pattern |
| Selection Process |
Computer-Based Examination (CBE)
Skill Test & Document Verification |
| Salary |
Rs. 29,500 to Rs. 65,000 + allowances |
| Official website |
www.careers.bhel.in |
ย
BHEL Artisan (Machinist) Syllabus 2026
ย
Trade Related Question (Machinist) :
ย
1. Drill, Tap, Die-types & application. Determination of tap drill size. Basic terminology related to screw thread. Reamer- material, types (Hand and machine reamer), parts and their uses, determining hole size for reaming, Reaming procedure.
2. Vernier height gauge: construction, graduations, Vernier setting & reading. Care and maintenance of Vernier height Gauge. Vernier caliper-its parts, principle, reading, uses & care. Outside micrometrics parts, principle, reading, uses, Reading of Vernier Micrometer), care & maintenance.
3. Drilling machines-types &their application, construction of Pillar & Radial drilling machine. Countersunk, counter bore and spot facing-tools and nomenclature. Cutting Speed, feed, depth of cut and Drilling time calculations.
4. Interchangeability: Necessity in Egg., field, Limit- Definition, types, terminology of limits and fits basic size, actual size, deviation, high and low limit, zero-line, tolerance zone, allowances. Different standard systems of fits and limits. (British standard system & BIS system)
5. Slotterโ Classification, principle, construction, Safety precaution. Introduction and their indexing process on a Slotter by its Rotary table graduations. Driving mechanisms, quick return motion and speed ratio. Safety points to be observed while working on a Slotter. Job holding devices-vice, clamps, V-block, parallel block etc. Slotting tools- types, tool angles. Spline โ types and uses.
6. Coolant & lubricant โIntroduction, types, properties, application & applying methods.
7. Milling Machine: Introduction, types, parts, construction and specification. Driving and feed mechanism of Milling Machine. Different types of milling cutters & their use. Cutter nomenclature. Different milling operations - plain, face, angular, form, slot, gang and straddle milling etc. Up and down milling. Different types of milling attachments and their uses.
8. Jigs and Fixturesโ Introduction, principle, types, use, advantages & disadvantages. Properties of metals general idea of physical, mechanical properties of metals, colour, weight, hardness toughness, malleability, ductility their effect on machinability.
9. Heat Treatment โ Introduction, necessity, types, Purposes, different methods of Heat Treatment. Heat Treatment of Plain Carbon Steel. Indexing-introduction & types. Indexing head-types & constructional details, function of indexing plates and the sector arms. Calculation for direct and simple indexing.
10. Grinding โ Introduction, grinding wheel- abrasive, types, bond, grade, grid, structure, standard marking system of grinding wheel, selection of the grinding wheel. Dressing, types of dresser. Glazing and Loading of wheels โ its causes and remedies. Roughness values and their symbols.
11. Surface Grinder โTypes, Parts, construction, use, methods of surface grinding
12. Cylindrical grinder: Introduction, parts, construction, types, specification, safety, different methods of cylindrical grinding. Cutting speed, feed, depth of cut, machining time calculation. Wet grinding and dry grinding, various types of grinding wheels and their application, grinding defects and remedies.
13. Tool & cutter grinder- Introduction, parts, construction, use and specification, different types of tool rest & their application. Various methods of cutter grinding. Various cutter grinding attachments and their uses.
14. Geometrical tolerances, definition, symbol and their application. Depth Micrometer โ Parts, reading, uses and safety. Different types of micrometers and their uses. Inside Micrometer โ its parts, reading and uses. Bore Dial Gauge โ its parts, reading and uses. Telescopic gauge. Gauges โ different types and their uses, difference between Gauges and Measuring Instruments. Gear introduction, use and type. Elements of a spur gear. Gear tooth of each forms types, merits and demerits of each.ย
15. Vertical Milling Machine- its parts. Method of boring in Vertical milling. Difference between Horizontal and Vertical Milling Machine. Reamer โ types, elements and uses. Calculations for cutting Reamer. Twist drill-nomenclature, cutter selection. Calculations for cutting twist drill.
16. VMC.CNC technology basics, Comparison between CNC VMC and conventional milling machines. Concepts of positioning accuracy, repeatability. CNC VMC machine elements and their functions -bed, chuck, Auto tool changer (ATC), ball screws, guide ways, LM guides, coolant system, hydraulic system, chip conveyor, rotary table, pallet changer, console, spindle motor and drive, axes motors, encoders, control switches. Feedback, CNC interpolation, open and close loop control systems. Machining operations and the tool paths in them - Face milling, Side milling, Pocket milling, Drilling, Countersinking, Rigid tapping, floating tapping Reaming, Rough boring, Finish boring, Spot facing. Concept of Co-ordinate geometry& polar coordinate points, concept of machine axis, axes convention on CNC lathes, work zero, machine zero.
17. Absolute and incremental programming. Programming - sequence, formats, different codes and words. ISO G and M codes for CNC milling. Canned cycles for drilling, peck drilling, reaming, tapping, finish boring. Subprograms.
18. Writing part programs as per drawing & check using CNC program verification software. Process planning, work holding, tool and cutting parameters selection according to the part geometry and dimensions. Program checking in single block and dry run modes -necessity and method. Tool offsets adjustment on first part for close tolerance dimensions, by oversizing (for outside dimensions) or under sizing (for inside dimensions) the dimension to prevent part rejection.
19. Process planning & sequencing, tool layout & selection and cutting parameters selection. Work offset, tool length offset, tool radius offset. Work holding with temporary holding and fixtures. Truing of part and fixture. Machine operation modes - Jog, MDI, MPG, Edit, Memory. Entering and editing programs on machine console, entering offsets data in offsets page. Use of Emergency stop, Reset, Feed rate override, spindle speed override, edit lock on/off buttons and keys.
20. Collisions due to program errors, effects of collisions. Costs associated with collisions - tool breakage, machine damage, injuries. Program execution in different modes like manual, single block and auto. Collisions due to improper machine setup and operation - causes and effects. Recovering from collisions. State the importance of Helical inter-polar and thread milling, advantage and limitation in CNC machine.
21. Tool wear and necessity for wear offsets change, entering wear offsets in offsets page. Effects of sudden machine stoppage due to power shutdown or use of emergency stop. Restarting machine from sudden stoppage.
22. Means of program transfer through electronic media. Productivity concepts, cycle time, machine down time, causes of down time - breaks, machine breakdown, inspection, part loading and unloading, chip cleaning. Effect of down time on profitability, reducing down time. Machine hour rate, components of machine hour rate - principal repayment, interest, overheads (power, tooling, space, salaries, indirect expenses). Calculation of machining cost, cost of down time.
23. Cutter radius compensation (CRC) and why it is necessary. Cutting tool materials, application of various materials. Cutting tool geometry for face mill, end mill, drill, countersink, tap, finish bore, reamer. Insert holding methods face mill, insert type end mill and insert type drill. Insert cutting edge geometry. Cutting parameters- cutting speed, feed rate, depth of cut. Tool wear, tool life, relative effect of each cutting parameter on tool life. Selection of cutting parameters from a tool manufacturer's catalogue for various operations.
24. Calculations for cutting helical slab/ cylindrical cutter. Calculations for cutting End Mill cutter. Bevel gear-elements, types, application, calculation for cutting bevel gear. Cam-types, elements & application, Plate cam manufacturing & calculations. Drum cam- its calculation, advantages, types of follower & its purposes. Worm wheel-application, elements & calculation, Worm-calculation. Types of Keys and their uses. Variation - types and causes. Testing of Gear and error.ย
Engineering Drawing & Workshop Calculation :
Engineering Drawing:
Introduction to Engineering
Drawing and Drawing Instruments โ
1. Conventions
2. Sizes and layout of drawing sheets
3. Title Block, its position and content
4. Drawing Instrument
5. Lines- Types and applications in drawing Free hand drawing of โ Geometrical figures and blocks with
6. dimension
7. Transferring measurement from the given object to the free hand sketches.
8. Free hand drawing offhand tools and measuring tools. Drawing of Geometrical figures:
9. Angle, Triangle, Circle, Rectangle, square, Parallelogram.
10. Lettering & Numbering- Single Stroke.
11. Dimensioning
12. Types of arrow head
13. Leader line with text
14. Position of dimensioning (Unidirectional, Aligned) Symbolic representationโ
15. Different symbol used in the related trades. Concept and reading of Drawing in
16. Concept of axes plane and quadrant
17. Concept of Orthographic and ISO metric projections
18. Method of first angle and third angle projections (definition and difference)
19. Reading of Job drawing of related trades.ย
Workshop Calculation:
Unit, Fractions
Classification of unit system
Fundamental and Derived units F.P.S, C.G.S, M.K.S and SI units
Measurement units and conversion
Fractions - Addition, subtraction, multiplication & division
Decimal fractions - Addition, subtraction, multiplication& division
Solving problems by using calculator
Square root, Ratio and Proportions, Percentage
Square and square root
Simple problems using calculator
Applications of Pythagoras theorem and related problems
Ratio and proportion
Ratio and proportion - Direct and indirect proportions
Percentage
Percentage - Changing percentage to decimal and fraction
Mass, Weight, Volume and Density
Mass, volume, density, weight and specific gravity
Related problems for mass, volume, density, weight and specific gravity
Speed and Velocity, Work, Power and Energy
Work, power, energy, HP, IHP, BHP and efficiency
Heat & Temperature and Pressure
Concept of heat and temperature, effects of heat, difference between heat and temperature, boiling point &ย melting point of different metals and non-metals
Concept of pressure - Units of pressure, atmospheric pressure, absolute pressure, gauge pressure and gauges used for measuring pressure
Basic Electricity
Introduction and uses of electricity, electric current AC,DC their
comparison, voltage, resistance and their units
Trigonometry
Measurement of angles
โข Trigonometrical ratios, Trigonometrical tables.ย
ย
Reasoning :
ย
1. Venn Diagrams
2. Similar Pairs/ Analogies
3. Data Interpretation
4. Passage โ True/False statements/ analogies
5. Logical Reasoning
6. Basic Maths/ Aptitude
7. Integers/ Percentages/ Prime Numbers etcย
BHEL Artisan (Machinist) Exam Pattern 2026
ย
Duration : 90 Minutes
Negative Marking : 0.25
ย
| S.No |
Subject |
No.of QUestion |
Marks |
| 1. |
Trade Related Question (Machinist) |
70 |
70 |
| 2. |
Engineering Calculations |
30 |
30 |
| 3. |
Test of Reasoning |
20 |
20 |
| ย |
Total |
120 |
120 |
Exam Date 2026 : 11th December 2026 (Tentative)
Starting Date of Application Form : 21st October 2026
Last Date of Application Form : 18th November 2026
Total Post : 101