Kurukshetra a journal on rural development is published by
A
Ministry of Finance
B
Ministry of Information and Broadcastin
C
Ministry of Rural Development
D
Planning Commission
Question 3Single Answer
Devaluation of a currency means
A
Fixing the value of the currency in conjuction with the movement in the value of a basket of predetermined currencies
B
Reduction in the value of a currency vis-à-vis major internationally traded currencies
C
Fixing the value of currency in multilateral consultaion with the IMF the World Bank and major trading partners
D
Permitting the currency to seek its worth in the international market
Question 4Single Answer
In India rural incomes are generally lower than the urban incomes, which of the following reasons account for this
1. a large number of farmers are illiterate and know little about scientific agriculture
2. prices of primary products are lower than those of manufactured products
3. Investments in agriculture has been low when compared to investment in industry
A
1 and 3
B
2 and 3
C
1 and 2
D
1,2 and 3
Question 5Single Answer
Which of the following programmes aims at the promotion of savings among rural women
A
Rashtriya Mahila Kosh
B
Indira Mahila Yojna
C
Jawahar Rozgar Yojna
D
Mahila Samridhi Yojna
Question 6Single Answer
What is Net National Product
A
the money value of final goods and services produced annually in the economy
B
the money value of annual service generation in the economy
C
the money value of tangible goods produced annually in the economy
D
The money value of tangible goods available in the economy
Question 7Single Answer
National income is the
A
net national product at market price
B
net national product at factor cost
C
net domestic product at market price
D
net domestic product at factor cost
Question 8Single Answer
Chelliah Committee of 1992 deals with the overhauling of our
A
financial system
B
tax system
C
patents and copyrights
D
Public sector undertakings
Question 9Single Answer
When was the Constituent Assembly of India formed?
A
1946
B
1947
C
1948
D
1950
Question 10Single Answer
Who was the Chairman of the Drafting Committee of the Indian Constitution?
A
Dr. Rajendra Prasad
B
Dr. B.R. Ambedkar
C
Jawaharlal Nehru
D
Sardar Vallabhbhai Patel
Question 11Single Answer
What is the lithosphere composed of ?
A
Water and gases
B
Rocks and minerals
C
Living organisms
D
Air and gases
Question 12Single Answer
Who is known as the "Missile Man of India"?
A
Dr. Homi J. Bhabha
B
Dr. Vikram Sarabhai
C
Dr. APJ Abdul Kalam
D
Dr. Satish Dhawan
Question 13Single Answer
Which organization is responsible for India's space exploration programs?
A
BARC
B
ISRO
C
DRDO
D
HAL
Question 14Single Answer
Which day is observed on 1 October every year as declared by the United Nations?
A
World Teachers’ Day
B
International Day of Non-Violence
C
World Food Day
D
International Day of Older Persons
Question 15Single Answer
The Union Public Service Commission (UPSC) completed 100 years of its establishment on which date in 2026?
A
26 January 2026
B
1 October 2026
C
15 August 2026
D
26 November 2026
Physics & Chemistry
Question 16Single Answer
Temperature can be expressed as derived quantity in terms of
A
length and mass
B
mass and time
C
length, mass and time
D
None of these
Question 17Single Answer
Electron volt is a unit of
A
potential difference
B
charge
C
energy
D
capacity
Question 18Single Answer
Dimensions of impulse are
A
[MLT –1]
B
[MLT²]
C
[MT–2]
D
[ML–1T–3]
Question 19Single Answer
Potential is measured in
A
joule/coulomb
B
watt/coulomb
C
newton–second
D
None of these
Question 20Single Answer
One Nanometer is equal to
A
10–9m
B
10–6m
C
10–10m
D
10–3m
Question 21Single Answer
Maxwell is the unit of
A
magnetic susceptibility
B
intensity of Magnetisation
C
magnetic Flux
D
magnetic Permeability
Question 22Single Answer
Which of the following is derived physical quantity ?
A
Mass
B
Velocity
C
Length
D
Time
Question 23Single Answer
What are the units of magnetic permeability ?
A
Wb A–1 m–1
B
Wb–1 Am
C
Wb A m–1
D
Wb A–1 m
Question 24Single Answer
Which of the following is not a synthetic fibre:
A
Anygora
B
Rayon
C
Nylon
D
Polyster
Question 25Single Answer
Which one of the following is not contained in Portland cement ?
A
Ca3Al2O6
B
Ca3SiO5
C
Ca2SiO4
D
Ca3(PO4)2
Question 26Single Answer
What is the reson for white cement to be white ?
A
It does not contain carbon
B
It does not contain silicon
C
It does not contain iron
D
It does not contain calcium
Question 27Single Answer
Which fertilizer is assimilated directly by the plant ?
A
Super phosphate
B
Nitrolim
C
Muriate of Potash
D
Humus
Question 28Single Answer
Which of the following chemicals is used in foam fire extinguishers ?
A
Aluminium sulphate
B
Copper sulphate
C
Cobalt sulphate
D
Nickel sulphate
Question 29Single Answer
What is a mixture of potassium nitrate, powdered charcoal and sulphur called ?
A
Glass
B
Cement
C
paint
D
Gun powder
Question 30Single Answer
Which one of the following chemicals is used in beauty parlours for hair – setting ?
A
Sulphur based
B
Phosphorus based
C
Silicon based
D
Iron based
Basics of Computer Application
Question 31Single Answer
Which Windows interface element typically appears to display information, a warning, an error message, or a request for confirmation?
A
Window
B
Pop-up menu
C
Message box
D
Taskbar
Question 32Single Answer
What is active desktop ?
A
a term that is synonymous with viewing your desktop as web page
B
a feature to customize your desktop to display informating you can update from the internet
C
both a and b above mentioned
D
A software
E
None of these
Question 33Single Answer
What is meant by an active window?
A
A window that is minimized
B
The window currently receiving user input
C
Any window currently open
D
The window opened first
Question 34Single Answer
What was America Online (AOL) primarily known for during the early popularization of consumer Internet access?
A
An online service providing Internet access and proprietary online content
B
A computer operating system
C
A spreadsheet application
D
A database management system
Question 35Single Answer
An application is
A
word processing, accounting and engineering programs are example of application programs
B
computer program designed to enable users to perform specific job functions
C
Both a and b above mentioned
D
a document
E
None of these
Question 36Single Answer
Which of the following programs enables you to calculate numbers related to rows and columns?
A
Window program
B
Spreadsheet program
C
Graphics program
D
Word program
E
None of these
Question 37Single Answer
The term Briefcase is used for
A
a special folder on the windows desktop used to keep documents up to date when shared between computers
B
a window that us currently open
C
A folder which keeps deleted, files for a while and can be retrieved from it
D
All of the above
E
None of these
Question 38Single Answer
In a graphical user interface, what is a button primarily used for?
A
Executing a command or initiating an action
B
Permanently storing data
C
Displaying the computer's IP address
D
Formatting a disk automatically
Question 39Single Answer
A channel (in windows terminology) is
A
a widely used online service that offers access to the internet
B
a specialized web site designed to work with the windows 98 subscribing feature to automatically download information from the internet and store it on your computer for later viewing
C
an area on the computer memory where text or graphics can be temporarily stored
D
All of the above
E
None of these
Question 40Single Answer
What does a checked checkbox generally indicate in a graphical user interface?
A
The associated option is enabled or selected
B
The application has closed
C
The file has been deleted
D
The computer is offline
Basics of Environment and Pollution Control
Question 41Single Answer
Which of the following defines an ecosystem?
A
A group of similar organisms
B
The interaction between living organisms and their physical environment
C
A community of plants
D
A population of animals
Question 42Single Answer
What is biodiversity?
A
The number of individuals in a population
B
The variety of life in a particular habitat or ecosystem
C
The amount of rainfall in a region
D
The average temperature of an area
Question 43Single Answer
Which of the following is an abiotic factor?
A
Bacteria
B
Plants
C
Sunlight
D
Animals
Question 44Single Answer
Which of the following is a biotic factor?
A
Water
B
Soil
C
Fungi
D
Air
Question 45Single Answer
What is sustainable use of natural resources?
A
Using resources without considering future needs
B
Using resources in a way that meets current needs without compromising future availability
C
Exploiting resources for maximum profit
D
Ignoring resource depletion
Question 46Single Answer
Which of the following is an example of a natural resource?
A
Plastic
B
Steel
C
Coal
D
Synthetic fibers
Question 47Single Answer
What is the role of decomposers in an ecosystem?
A
To produce food
B
To consume living organisms
C
To break down dead organic matter
D
To provide shelter
Question 48Single Answer
Which level of the food chain do plants occupy?
A
Primary consumers
B
Secondary consumers
C
Producers
D
Decomposers
Question 49Single Answer
What is the significance of biodiversity?
A
It increases vulnerability to diseases
B
It provides ecosystem stability and resilience
C
It reduces the number of natural resources
D
It has no impact on the environment
Question 50Single Answer
What is the primary source of energy for most ecosystems?
A
Chemical energy
B
Geothermal energy
C
Solar energy
D
Nuclear energy
Important Questions Package
RRB JE Civil Exam Online Question Bank Package
Buy RRB JE Civil Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in RRB JE Civil question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
RRB JE (Civil) CBT 2 Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
2.
RRB JE (Civil) CBT 2 Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
3.
RRB JE (Civil) CBT 2 Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
4.
RRB JE (Civil) CBT 1 Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹600]
5.
RRB JE (Civil) CBT 1 Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
6.
RRB JE (Civil) CBT 2 Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
7.
RRB JE (Civil) CBT 2 Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
8.
RRB JE (Civil) CBT 1 Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
9.
RRB JE (Civil) CBT 1 Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹450]
10.
RRB JE (Civil) CBT 2 Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
11.
RRB JE (Civil) CBT 2 Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
12.
RRB JE (Civil) CBT 2 Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
13.
RRB JE (Civil) CBT 1 Exam - English
Description : 2000 Question with Answer.
₹151[₹500]
14.
RRB JE (Civil) CBT 1 Exam - English
Description : 1000 Question with Answer.
₹101[₹500]
15.
RRB JE (Civil) CBT 1 Exam - Hindi
Description : 2000 Question with Answer.
₹151[₹500]
16.
RRB JE (Civil) CBT 1 Exam - Hindi
Description : 1000 Question with Answer.
₹101[₹500]
17.
RRB JE Civil Exam (CBT 2) - English (Old)
Description : 1000 Question with Answer
₹101[₹500]
18.
RRB JE Civil Exam (CBT 2) Question Bank Book - Hindi (Old)
Description : 1000 Question with Answer (Printed Material)
₹450[₹800]
Civil
Question 51Single Answer
A water supply distribution system for an averagely-populated township is to be designed for
A
Maximum daily demand
B
Maximum hourly demand and fire demand
C
Average demand
D
Maximum daily demand and fire demand or maximum hourly demand, whichever is higher
Question 52Single Answer
A combined sewerage system is more appropriate for developed areas where
A
Rainfall occurs for a very few days in a year
B
Rainfall occurs almost uniformly throughout the year
C
Air temperatures are nearly uniform throughout the year
D
Air temperatures through the year include extremes during certain runs of days
Question 53Single Answer
100 m3 of sludge holds a moisture content of 95%. If its moisture content chagnes to 90%, the volume of this sludge will then be
A
40.5m3
B
50m3
C
75m3
D
94.7m3
Question 54Single Answer
The design overflow rate of a sedimentation tank is chosen considering
A
Flow rate through the tank
B
Diameter of the particle intended to be removed
C
Volume of the sedimentation tank
D
Detention time in the tank
Question 55Single Answer
Consider the following statements in respect of flow equalization in a waste water treatment plant :
1. Biological treatment is enhanced because shock loadings are eliminated or minimized
2. Flow equalizations is an attractive option for upgrading the performance of overloaded treatment plants.
3. Inhibiting substances can be diluted and pH can be stabilized
4. Thickening performance of primary sedimentation tanks following grit removal is improved.
Which of the above statements are correct?
A
1, 2, 3 and 4
B
1, 2 and 3 only
C
1, 2 and 4 only
D
3 and 4 only
Question 56Single Answer
A drain carrying 5m3/s of wastewater with its BOD of 100mg/l joins a stream carrying 50 m3/ s flow with its BOD of 5mg/l. What will be the value of the BOD of the combined flow after complete mixing?
A
3.6 mg/l
B
13.6 mg/l
C
33.6 mg/l
D
53.6 mg/l
Question 57Single Answer
Consider the following statements in respect of aerated grit chamber:
1. The grit accumulates at the bottom in advancing spiral-flow aeration tanks, location ally preceded by grit chambers, led to the eventual development of aerated grit chambers.
2. The excessive wear on grit handling equipment is a major factor for the popularity of aerated grit chambers.
3. Aerated grit chambers are designed to provide detention period of 1 minute at maximum rate of flow.
4. Diffusers are located at 0.45 m to 0.6 m above the bottom of teh chamber.
Which of the above statements are correct?
A
1, 2 and 3 only
B
3 and 4 only
C
1, 2 and 4 only
D
1, 2, 3 and 4
Question 58Single Answer
Quick sand condition occurs when
A
the void ratio of the soil becomes 1.0
B
the upward seepage pressure in soil becomes zero
C
the upward seepage pressure in soil becones equal to the saturated unit weight of he soil
D
the upward seepage pressure in soil becomes equal to he submerged unit weight of the soil
Question 59Single Answer
The side of a square land was measured as 150 m and is in error by 0.05 m. What is the corresponding error in the computed area of the land.
A
5 m2
B
25 m2
C
10 m2
D
20 m2
Question 60Single Answer
Consider the following statements in respect of anaerobic sludge digester:
1. It is less expensive compared to several other methods available.
2. Processing of separable solids impacts the environment to a minimum
3. Quantity of separated solids requiring disposal is minimal
4. Digested sludge is very readily dewaterable.
Which of the above statements are correct?
A
1, 2, 3 and 4
B
1, 2 and 3 only
C
3 and 4 only
D
1, 2 and 4 only
Question 61Single Answer
Consider the following statements :
1. There will be no defects in select grade timbers.
2. The codal values for strength of grade-II timer without defects may be reduced by 37.5%.
3. For timber used as columns, the permissible stress in ungraded timbers is adopted with a multiplying factor of 0.50.
4. In case of wind force and earthquakes, a modification factor of 1.33 is adopted. Which of the above statements are correct ?
A
1 and 3 only
B
1 and 4 only
C
2 and 4 only
D
2 and 3 only
Question 62Single Answer
Consider the following statements regarding timber :
1. The strength of timber increases by Kiln seasoning.
2. Cutting of wood is to be done prior to treatment.
3. Water seasoning is good for prevention of warping.
4. ASCU treatment enhances the strength of wood. Which of the above statements are correct ?
A
1, 2 and 3 only
B
2, 3 and 4 only
C
1, 3 and 4 only
D
1, 2, 3 and 4
Question 63Single Answer
Gase(s) emitted during rotting or decomposition of timber is /are mainly
A
Methane and Hydrogen
B
Hydrogen Sulphide
C
Carbonic acid and Hydrogen
D
Ammonia
Question 64Single Answer
Efflorescence of bricks is due to
A
Excessive burning of bricks
B
High silt content in brick clay
C
High porosity of bricks
D
Soluble salts present in parent clay
Question 65Single Answer
Disintegration of bricks masonry walls is primarily due to
1. Efflorescence
2. Magnesium sulphate in brick
3. Calcined clay admixtures
4. Kankar nodules
Which of the a above statements are correct ?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 66Single Answer
Consider the following test :
1. Transverse strength test
2. Water absorption test
3. Impact test
4. Breaking strength test
Which of the above are relevant to testing of tiles ?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 67Single Answer
Which of the following statements is/are correct regarding the strength of cement ?
1. Particle sizes less than 3 m increases the viscous nature of the cement.
2. Finer particles in cement can be replaced by fly-ash to improve the strength.
A
1 only
B
2 only
C
Both 1 and 2
D
Neither 1 nor 2
Question 68Single Answer
The constituent compound in Portland cement which reacts immediately with water, and also sets earliest, is
A
Tricalcium silicate
B
Dicalcium silicate
C
Tricalcium aluminate
D
Tetracalcium aluminoferrite
Question 69Single Answer
Which of the following statements are correct with regard to cement mortar ?
1. Workability of cement mortar can be improved by addition of lime.
2. Fly-ash cement is economical in plastering jobs.
3. Addition of saw dust improves workability.
4. Sand in mortar can be replaced by finely crushed fire bricks.
A
1, 2, 3 and 4
B
1, 2 and 3 only
C
3 and 4 only
D
1, 2 and 4 only
Question 70Single Answer
In a concrete mix of proportion 1 : 3 : 6, the actual quantity of sand, which is judged to have undergone 15% bulking, per unit volume of cement, will be
A
3.00
B
3.45
C
4.50
D
6.00
Question 71Single Answer
Consider the following statements:
1. IS 3583 refers to Burnt Clay Paving Bricks.
2. IS 5779 refers to Burnt Clay Soling Bricks.
3. IS 3952 refers to Burnt Clay Hollow Bricks.
4. IS 2222 refers to Burnt Clay Lay Bricks.
Which of the above statements are correct?
A
1, 2 and 3 only
B
1, 2 and 4 only
C
3 and 4 only
D
1, 2, 3 and 4
Question 72Single Answer
Consider the following statements:
1. A high aggregate impact value indicates strong aggregates.
2. A low aggregate crushing value indicates high crushing strength of aggregates.
3. Aggregates having elongation index values greater than 15% are generally considered suitable for pavement construction.
4. Flakiness index of aggregates should not be less than 25% for use in road construction.
Which of the above statements are correct?
A
2 and 3 only
B
2 and 4 only
C
1 and 3 only
D
1 and 4 only
Question 73Single Answer
Consider the following statements regarding refractory bricks in furnaces:
1. The furnace is fired at temperatures more than 1700°C.
2. Silica content in the soil should be less than 40%.
3. Water absorption of bricks should not exceed 10%
4. Chrome bricks are known as basic bricks. Which of the above statements are correct?
A
1 and 2 only
B
2 and 4 only
C
1 and 3 only
D
3 and 4 only
Question 74Single Answer
Consider the following statements about lime:
1. Calcination of limestone results in quick lime.
2. Lime produced from pure variety of chalk is hydraulic lime.
3. Hydrated lime is obtained by treating quick lime with water.
Which of the above statements are correct?
A
1, 2 and 3
B
1 and 2 only
C
2 and 3 only
D
1 and 3 only
Question 75Single Answer
Consider the following statements:
1. If more water is added to concrete for increasing its workability, it results into concrete of low strength.
2. No slump is an indication of a good workable concrete.
3. Higher the slump of concrete, lower will be its workability.
4. Workability of concrete is affected by water content as well as water-cement ratio.
Which of the above statements are correct?
A
1 and 3 only
B
2 and 3 only
C
1 and 4 only
D
2 and 4 only
Question 76Single Answer
Pozzolana used as an admixture in concrete has the following advantages:
1. It improves workability with lesser amount of water.
2. It increases the heat of hydration and so lets the concrete set quickly.
3. It increases the resistance of concrete to attack by salts and sulphates.
4. It leaches out calcium hydroxide.
Select the correct answer using the codes given below:
A
1, 2 and 3 only
B
1, 2 and 4 only
C
1, 3 and 4 only
D
2, 3 and 4 only
Question 77Single Answer
Consider the following statements regarding Cyclopean Concrete:
1. Size of aggregate is more than 150 mm.
2. Size of aggregate is less than 150 mm.
3. High slump.
4. High temperature rise due to heat of hydration.
Which of the above statements are correct?
A
1 and 3 only
B
1 and 4 only
C
2 and 3 only
D
2 and 4 only
Question 78Single Answer
A chain, working a crane, has sectional area of 625 mm2 and transmits a load of 10 kN. When the load is being lowered at a uniform rate of 40 m/min, the chain gets jammed suddenly at which time the length of the chain unwound is 10m. Assuming E = 200 GPa, the stress induced in the chain due to this sudden jamming is
A
100.6 N/mm2
B
120.4 N/mm2
C
140.2 N/mm2
D
160.0 N/mm2
Question 79Single Answer
In mild steel specimens subjected to tensile test cycle, the elastic limit in tension is raised and the elastic limit in compression is lowered, This is called
A
Annealing effect
B
Bauschinger effect
C
Strain rate effect
D
Fatigue effect
Question 80Single Answer
Consider the following statements :
1. The shear stress distribution across the section of a circular shaft subjected to twisting varies parabolically.
2. The shear stress at the centre of a circular shaft under twisting moment is zero
3. The shear stress at the extreme fibres of a circular shaft under twisting moment is maximum.
Which of the above statements is/are correct?
A
1, 2 and 3
B
1 only
C
2 only
D
3 only
Question 81Single Answer
One bag of Portland cement, 50 kg in weight, would normally have a bulk volume of
A
30 l
B
35 l
C
40 l
D
45 l
Question 82Single Answer
AsCu, a preservative for wood, developed by the Forest Research Institute, Dehradun, comprises of chemicals:
A
1 : 1 : 1
B
1 : 2 : 3
C
1 : 2 : 4
D
1 : 3 : 4
Question 83Single Answer
Consider the following statements related to autoclave bricks:
1.Less water absorption compared to other bricks.
2.Noise reduction
3.It is cheap compared to other types of bricks.
4.Requirement of bulk volume of mortar in joints being relatively less compared to other types of brick masonry.
5.Not recommended for outer walls.
Which of the above statements are relevant to the use of ‘autoclave’ bricks?
A
1, 2 and 4
B
1, 3 and 5
C
2, 3 and 4
D
2, 4 and 5
Question 84Single Answer
The minimum number of annular rings to be seen in every 2.54 cm in the radial direction from the core for timber to be classified as ‘Dense’ is
A
10
B
20
C
25
D
30
Question 85Single Answer
If the actual thickness of a brick masonry wall is 19 cm, its effective length is 2.70 m, its effective height is 2.82 m and its code specified stiffening coefficient is 1.2 then, for design considerations, the slenderness ratio of the wall will be taken as
A
11.8
B
12.4
C
14.2
D
14.8
Question 86Single Answer
Consider the following forms of water in a hydrated cement paste:
1.Capillary water
2.Chemically combined water
3.Interlayer water
4.Adsorbed water
Which of the above forms of water will, on its/their removal, cause shrinkage of the paste?
A
1, 2 and 3
B
1, 2 and 4
C
2, 3 and 4
D
1, 3 and 4
Question 87Single Answer
Consider the following statements:High early strength of cement is obtained as a result of
1.Fine grinding.
2.Decreasing the lime content
3.Burning at higher temperature
4.Increasing the quality of gypsum.
Which of the above statements are correct?
A
1 and 2
B
1 and 3
C
2 and 3
D
3 and 4
Question 88Single Answer
Consider the following statements related to ‘composite mortar’:
1.Addition of lime to cement mortar improves its workability
2.Composite mortar is obtained by adding 10% by weight of cement and mixing with water.
3.Composite mortar is not preferred in tall buildings.
4.Mechanical grinding is essential for developing composite mortar.Which of the above statements are true in this case?
A
1, 2 and 3 only
B
1, 3 and 4 only
C
2, 3 and 4 only
D
1, 2, 3 and 4
Question 89Single Answer
Consider the following statements related to ‘non-destructive testing’ of concrete:
1.Indentation test is used to assess the quality of concrete.
2.Resonant Frequency Method is based on a laboratory test.
3.Compressive strength of concrete is estimated through Pulse Velocity Measurement.
4.Dynamic modulus of Elasticity is determined by a Sonometer Test.
5.Thickness of concrete can be estimated by in-situ Rebound Hammer Test.
Which of the above statements are correct?
A
1, 2 and 3 only
B
1, 2 and 5 only
C
1, 2, 3 and 4 only
D
1, 2, 3, 4 and 5
Question 90Single Answer
What is the amount of water required for a workable RC of mix 1 : 2: 4 by weight., when W/C is 0-60 and unit weight of concrete is 2400 kg/m3?
A
165 l
B
205 l
C
245 l
D
285 l
Question 91Single Answer
What will be the depth of penetration of the plunger in Vicat Apparatus (IS : 5513 - 1976) from the bottom of the Vicat Mould, when the cement paste is tested for standard consistency, according to IS 4031 – 1988 ?
A
11 to 15 mm
B
8 to 10 mm
C
15 to 17 mm
D
5 to 7 mm
Question 92Single Answer
Two sewer pipelines A and B (having the same diameter and made of the same material) are laid at a bed slope of 1 in 225 and 1 in 625, respectively. Determine the ratio of their carrying capacities (QA to QB) .
A
B
C
1
D
Question 93Single Answer
Select the correct statement with respect to an over - reinforced cement concrete section under the working stress method .
A
The compressive stress in steel reaches the allowable limit before the maximum tensile stress in concrete reaches the allowable limit
B
Tensile steel stress and maximum compressive stress in concrete simultaneously reach their allowable limits
C
The allowable limiting stress is reached in concrete before the steel stress reaches the limiting value
D
The tensile stress in steel reaches the allowable limit before the maximum compressive stress in concrete reaches the allowable limit
Question 94Single Answer
A cantilever beam of span L is built - in at the support. It is restrained against lateral deflection and torsion at the free end. The effective length of compression flange for the beam as per IS 800 : 2007 is
A
0.5 L
B
0.85 L
C
2 L
D
0.75 L
Question 95Single Answer
What is the principle of plane surveying ?
A
Working from part to whole
B
Working from point to area
C
Working from angle to volume
D
Working from whole to part
Question 96Single Answer
According is IS 5968 : 1987, the minimum radius of radius of curve to be provided in the alignment of unlined canals carrying a discharge of less than 30 cumecs up to 15 cumecs is :
A
100 m
B
1000 m
C
600 m
D
150 m
Question 97Single Answer
A Pelton wheel is to be designed for a pitch diameter of 1 m and jet diameter of 0.1 m. The number of buckets on the runner computed by Taygun’s formula is :
A
20
B
25
C
15
D
10
Question 98Single Answer
What is the effect of fly ash in concrete ?
A
Reduces the secondary hydration process
B
Increases the heat of hydration
C
Increases the amount of air entrainment
D
Reduces the heat of hydration
Question 99Single Answer
As per IS 456 : 2000, the minimum grade of concrete to be used for plain concrete and reinforced concrete, respectively, in concrete works exposed directly along the sea coast are :
A
M 20 and M 30
B
M 20 and M 25
C
M 22 and M 40
D
M 15 and M 25
Question 100Single Answer
Identify the property that changes as a function of the geometrical dimensions of a section in structural materials :
A
Mass density
B
Moment of inertia
C
Poission’s ratio
D
Modulus of elasticity
Question 101Single Answer
As per IRC (Indian Roads Congress) recommendation, what will be the designed stopping sight distance (in metres) at the vehicle speed of 80 km/h on a rural highway ?
A
120
B
140
C
70
D
60
Question 102Single Answer
No deduction is made in the quantity estimation for plastering work in cement mortar for openings having size up to :
A
0.5 m2
B
1.0 m2
C
3 m2
D
0.75 m2
Question 103Single Answer
What is the height of slump cone mould used for testing the workability of the concrete ?
A
20 cm
B
10 cm
C
30 cm
D
25 cm
Question 104Single Answer
Select the correct option with regard in the following statements (S1, S2) pertaining to pavements .
S1 : Present serviceability index is used for the functional evaluation of pavement surface condition
S2 : Rigid pavements are less affected by temperature variations than flexible pavements
A
Statements S1 is true and Statement S2 is false
B
Both statements S1 and S2 are false
C
Statements S1 is false and Statement S2 is true
D
Both statements S1 and S2 are true
Question 105Single Answer
If the quadrantal bearing of a line AB is S 31'35' E, then its whole circle bearing is equal in :
A
121o25'
B
148o25'
C
58o25'
D
211o25'
Question 106Single Answer
The overflowing sheet of water on a weir is called :
A
creek
B
crest
C
limp
D
nappe
Question 107Single Answer
According to IS 456 - 2000, what is the slump of a medium degree of workability of concrete if planed in heavily reinforced sections like slabs, beams, walls, columns ?
A
10 - 25 mm
B
25 - 50 mm
C
0 - 10 mm
D
50 - 100 mm
Question 108Single Answer
Which of the following is Kharif season in India ?
A
March / April to June / July
B
December / January to April / May
C
May / June to October / November
D
October / November to April / May
Question 109Single Answer
The estimated value of a built - up property at the end of its useful life without dismantled is called :
A
market value
B
book value
C
scrap value
D
salvage value
Question 110Single Answer
The amount of cement required for 100 m2 area, of damp proof course with 2.5 cm thinkness, in with proportion of 1: 2 : 4 (cement : sand : aggregate) will be :
A
2.5 m2
B
0.55 m2
C
1.10 m2
D
0.25 m2
Question 111Single Answer
Select the correct statement related to increasing the carbon content in steel from 0.2 to 0.9 percent .
A
Increasing the carbon content in steel decreases the yield stress and increases the ductility
B
Increasing the carbon content in steel increases the yield stress and reduces the ductility
C
Increasing the carbon content in steel decreases the yield stress and does not affect the ductility
D
Increasing the carbon content in steel does not have any effect on the yield stress or ductility
Question 112Single Answer
Which of the following laws states that pressure or intensity of pressure at a point is static fluid is equal in all directions ?
A
Newton's law
B
Pascal's law
C
Darcy's law
D
Hydrostatic law
Question 113Single Answer
The determination of plasticity index and the percentage by weight of clay mineral finer than 2 µ present in the soil were done for two soil samples A and B. The ratio of plasticity index to the percentage of clay size particle for the samples A and B are given in the table .
Soil sample Ratio of plasticity index to percentage of clay size particle
Sample A Less than 0.75
Sample B Greater than 1.25 The two soil sample A and B are classified as
A
Sample A : Inactive; Sample B : Active
B
Sample A : Active; Sample B : Normal
C
Sample A : Active; Sample B : Inactive
D
Sample A : Normal ; Sample B : Inactive
Question 114Single Answer
Which of the following compounds of cement is responsible for early strength ?
A
C4AF
B
C3S
C
C3A
D
C2A
Question 115Single Answer
According to SP : 27 - 1984, the thickness of slab or RC slab shall be measured to the nearest of :
A
0.0002 m
B
0.005 m
C
0.0001 m
D
0.01 m
Question 116Single Answer
Classify the following pollutants as primary pollutants (PP) and secondary pollutants (SP). Ozone, Carbon monoxide, Particulate matter, photochemical smog, Nitrogen oxides, Aerosol/mist, Hydrocarbons, Perory - Acetyl - Nitrate, Sulphur dioxide.
bulk unit weight of a soil when it is fully saturated
B
saturated bulk unit weight to total void
C
total void to saturated bulk unit weight
D
total void to saturated bulk unit weight
Question 118Single Answer
Identify the test to be conducted for the determination of the modulus of subgrade reaction in pavement design .
A
Plate bearing test
B
Triaxial test
C
CBR test
D
Direct shear test
Question 119Single Answer
In limit state design, the design bond stress for deformed bars (conforming to IS 1786) for M20 concrete mentioned in IS 456 : 2000 is (in N/mm2 units) :
A
1.2
B
1.8
C
1.68
D
1.92
Question 120Single Answer
Which of the following can be considered as a taking off point in road planning in India ?
A
Lucknow plan
B
Delhi plan
C
Bombay plan
D
Nagpur plan
Question 121Single Answer
The following two statements pertain to a simply supported under reinforced concrete beam. Select the correct option with regard is these statements .
1. The failure of the beam takes place due to the yielding of steel .
2. The moment of resistance of the beam is more than that of the balanced section of the beam .
A
Statement 1 is true but Statement 2 is false
B
Statement 1 is false but Statement 2 is true
C
Both statement 1 and 2 are true
D
Both statement 1 and 2 are false
Question 122Single Answer
A continuous beam ABC with span AB = BC = L is shown in the figure. Support A is fixed type, and supports B and C are roller type. The kinematic indeterminacy of the beam is :
A
2
B
3
C
5
D
4
Question 123Single Answer
The soils transported and deposited by a river or a stream care called :
A
aeolian soils
B
alluvial soils
C
lacustrine soils
D
marine soils
Question 124Single Answer
What is the mechanical extra widening required for a two-lane pavement of width 7 m on a horizontal curve of radius 250 m, if the longest wheel base of a vehicle expected on the road is 5 m with a design speed of 70 km/h ?
A
0.155 m
B
0.225 m
C
0.100 m
D
0.552 m
Question 125Single Answer
The following are some of the errors that area associated with a total station survey work. Vertical collimation error, Centering error, Horizontal collimation error, Eccentricity error Categorize the given errors as those due to temporary adjustments (T) and permanent adjustments (P).
A
T : Vertical collimation error, Horizontal collimation error
P : Centering error, Eccentricity error
B
T : Centering error, Horizontal collimation error, Eccentricity error
P : Vertical collimation error
C
T : Eccentricity error, Horizontal collimation error
P : Centering error, Vertical collimation error, Eccentricity error
D
T : Centering error
P : Vertical collimation error, Horizontal collimation error, Eccentricity error
Question 126Single Answer
According to IS 800 : 2007, identify the property which is considered as a mechanical property of structural steel, important in design .
A
Unit mass
B
Maximum percent elongation on a standard gauge length
C
Co - efficient of thermal expansion
D
Poisson ration
Question 127Single Answer
Which of the following methods is NOT used for measuring air content in fresh concrete ?
A
Blaine air permeability method
B
Gravimetric method
C
Pressure method
D
Volumetric method
Question 128Single Answer
Which of the following methods is NOT used for the calculation of depreciation of a structure ?
A
Straight line method
B
Quantity survey method
C
Geometric projection method
D
Declining balance method
Question 129Single Answer
The failure of an over reinforced concrete beam is due to :
A
compression failure
B
mid failure
C
shear failure
D
tension failure
Question 130Single Answer
In which type of estimate is 'Court yard' NOT considered ?
A
Unit rate estimate
B
Plinth area estimate
C
Lump sum estimate
D
Cub rate estimate
Question 131Single Answer
The primary purpose of surveying is to determine:
A
Soil strength
B
Concrete grade
C
Relative positions of points
D
Water pressure
Question 132Single Answer
Surveying in which earth curvature is neglected is called:
A
Geodetic surveying
B
Astronomical surveying
C
Plane surveying
D
Hydrographic surveying
Question 133Single Answer
Earth curvature is considered in:
A
Chain surveying
B
Plane surveying
C
Compass surveying
D
Geodetic surveying
Question 134Single Answer
The fundamental principle of surveying is to work from:
A
Part to whole
B
Low level to high level
C
East to west
D
Whole to part
Question 135Single Answer
Another basic principle of surveying is fixing a point by:
A
At least two measurements
B
One measurement
C
Guesswork
D
One angle only
Question 136Single Answer
Chain surveying is most suitable for:
A
Large hilly areas
B
Dense cities
C
Underground mines
D
Small open areas
Question 137Single Answer
The standard length of a metric chain may be:
A
20 m
B
10 m
C
5 m
D
50 m only
Question 138Single Answer
A 20 m metric chain contains:
A
50 links
B
200 links
C
150 links
D
100 links
Question 139Single Answer
The length of one link in a metric chain is:
A
10 cm
B
20 cm
C
25 cm
D
50 cm
Question 140Single Answer
Arrows in chain surveying are used to mark:
A
Chain lengths
B
Angles
C
Bearings
D
Elevations
Question 141Single Answer
A ranging rod is used for:
A
Measuring pressure
B
Levelling
C
Measuring bearings
D
Ranging straight lines
Question 142Single Answer
Direct ranging is possible when end stations are:
A
Invisible
B
At different latitudes
C
Underground
D
Intervisible
Question 143Single Answer
Reciprocal ranging is used when:
A
Stations are intervisible
B
Ground is level
C
Chain is short
D
Stations are not intervisible
Question 144Single Answer
A cross-staff is mainly used to set out:
A
30° angles
B
45° angles
C
Right angles
D
Vertical angles
Question 145Single Answer
An offset measured perpendicular to a chain line is called:
A
Oblique offset
B
Tie line
C
Perpendicular offset
D
Check line
Question 146Single Answer
A check line is used to check:
A
Accuracy of framework
B
Magnetic declination
C
Staff reading
D
Contour interval
Question 147Single Answer
A tie line is used mainly to:
A
Measure vertical angle
B
Find magnetic north
C
Measure RL
D
Locate interior details
Question 148Single Answer
An ideal chain survey framework consists mainly of:
A
Well-conditioned triangles
B
Circles
C
Squares only
D
Curves
Question 149Single Answer
In a well-conditioned triangle, no angle should normally be less than: