📚 Exam by Category
▾
Objective Questions

Latest Robotics Engineering Exam Question (Objective Questions), MCQ in English

Subjects : Robotics Engineering

Question Bank Robotics Engineering Exam - English
Back to Exam

Robotics Engineering

Question 1Single Answer
In forward kinematics for mobile platforms, the Ackermann steering model for a vehicle with wheelbase b and turning radius R gives the instantaneous center of rotation at:
  1. A
    Distance R from the rear axle along the line perpendicular to the vehicle axis.
  2. B
    The midpoint between front wheels.
  3. C
    The intersection of extended front and rear wheel axes.
  4. D
    The center of the rear axle.
Question 2Single Answer
For a redundant manipulator with 7 DOF, forward kinematics must account for:
  1. A
    Only translational degrees of freedom.
  2. B
    Reduced workspace due to extra joints.
  3. C
    Self-motion manifold in the null space for the same end-effector pose.
  4. D
    Fixed orientation regardless of configuration.
Question 3Single Answer
The forward kinematics solution for a 3-DOF RRR spherical wrist is used to compute:
  1. A
    The position of the wrist center from base joints and orientation from wrist joints.
  2. B
    The full pose from all joints combined)
  3. C
    Only the orientation matrix.
  4. D
    Velocity profiles.
Question 4Single Answer
For a parallel robot like the Delta robot, forward kinematics involves solving:
  1. A
    A system of nonlinear equations for the intersection of spheres defined by leg lengths.
  2. B
    Simple chain multiplication like serial robots.
  3. C
    Inverse geometric for each leg.
  4. D
    Only rotational transformations.
Question 5Single Answer
In forward kinematics for a mobile manipulator, the end-effector pose is the composition of:
  1. A
    Dynamic equations.
  2. B
    Only arm kinematics relative to base.
  3. C
    Inverse for the platform.
  4. D
    Base platform transformation and manipulator arm transformation.
Question 6Single Answer
The determinant of the rotation submatrix in a homogeneous transformation must be:
  1. A
    Variable based on joint angles.
  2. B
    0 for singularity.
  3. C
    -1 for reflection.
  4. D
    1 for proper orientation.
Question 7Single Answer
For a 6-DOF manipulator, the forward kinematics yields a pose with:
  1. A
    7 parameters including scale.
  2. B
    6 parameters: 3 for position and 3 for orientation (e.g., roll-pitch-yaw).
  3. C
    Only 3 translational parameters.
  4. D
    4 quaternion parameters for orientation.
Question 8Single Answer
In forward kinematics for an anthropomorphic arm, the shoulder offset is modeled by:
  1. A
    Ignoring the offset for simplicity.
  2. B
    Non-zero d1 or a1 in D-H parameters for the first joint.
  3. C
    Using Euler angles only.
  4. D
    Prismatic joints at base.
Question 9Single Answer
For a mobile platform with holonomic constraints, forward kinematics uses:
  1. A
    Only position updates without orientation.
  2. B
    Dynamic models for acceleration.
  3. C
    Inverse for path planning.
  4. D
    Kinematic model based on wheel velocities and non-sliding conditions.
Question 10Single Answer
For a manipulator with spherical joints, forward kinematics simplifies to:
  1. A
    No transformation matrices neede
  2. B
    Pure translational motion.
  3. C
    Redundant parameters.
  4. D
    Euler angle representations for orientation without gimbal lock issues in computation.
Question 11Single Answer
For a redundant 7-DOF arm like the KUKA LBR iiwa, forward kinematics computes the pose and:
  1. A
    Reduces to 6-DOF equivalent.
  2. B
    Allows multiple configurations for the same pose due to redundancy.
  3. C
    Ignores the seventh joint.
  4. D
    Uses pseudo-inverse for position only.
Question 12Single Answer
In forward kinematics for a cable-driven parallel robot, the pose is determined by:
  1. A
    Only inverse for cables.
  2. B
    Serial chain multiplication.
  3. C
    Solving for platform position where cable lengths satisfy tension constraints.
  4. D
    Ignoring dynamics.
Question 13Single Answer
In forward kinematics for non-serial manipulators like humanoids, the transformation is:
  1. A
    Closed-loop.
  2. B
    Linear chain only.
  3. C
    A tree-structured product of transformations from base to each limb end-effector.
  4. D
    Single matrix.
Question 14Single Answer
In a 6-DOF industrial robot, the wrist singularity occurs when:
  1. A
    The base joints align.
  2. B
    The last three joint axes align, leading to loss of one rotational DOF.
  3. C
    The elbow is straight.
  4. D
    The shoulder is offset.
Question 15Single Answer
For forward kinematics of a Stewart platform, it requires:
  1. A
    No computation.
  2. B
    Simple D-H chain.
  3. C
    Only 3 DOF.
  4. D
    Solving a system of equations based on leg lengths and geometry.
Question 16Single Answer
The Jacobian in forward kinematics relates joint velocities to:
  1. A
    Accelerations.
  2. B
    Positions only.
  3. C
    End-effector linear and angular velocities.
  4. D
    Torques.
Question 17Single Answer
In mobile platforms, forward kinematics from wheel encoders assumes:
  1. A
    No slip and accurate wheel radius.
  2. B
    Infinite friction.
  3. C
    Zero mass.
  4. D
    Constant velocity.
Question 18Single Answer
The translational part of ^i T_j for j > i is obtained by:
  1. A
    Direct addition of a_k.
  2. B
    Multiplying the individual translations adjusted by intermediate rotations.
  3. C
    Ignoring rotations.
  4. D
    Using vectors only.
Question 19Single Answer
For forward kinematics in underwater robots, it includes:
  1. A
    Standard D-H but with buoyancy forces in dynamics, kinematics unchanged)
  2. B
    Modified for fluid)
  3. C
    No transformation.
  4. D
    Only 2
Question 20Single Answer
The number of solutions in forward kinematics is:
  1. A
    Multiple for redundant.
  2. B
    Always one unique pose for given joint variables.
  3. C
    None for singular.
  4. D
    Infinite for prismati
Question 21Single Answer
For a 4-DOF SCARA, the orientation is fixed except for:
  1. A
    No orientation.
  2. B
    Rotational joints affecting xy.
  3. C
    All DOF affect orientation.
  4. D
    The vertical prismatic joint affecting z only.
Question 22Single Answer
For forward kinematics of a legged robot, each leg end-effector pose is computed relative to:
  1. A
    The body frame, then composed with body pose.
  2. B
    Ground frame.
  3. C
    Individual joints.
  4. D
    Inverse.
Question 23Single Answer
For forward kinematics in vision-guided robots, the pose is:
  1. A
    Inverse from image.
  2. B
    Only joint based)
  3. C
    No kinematics.
  4. D
    Combined with camera calibration matrix and image features.
Question 24Single Answer
Human-like decision-making in robotics uses:
  1. A
    No inference
  2. B
    Bayesian inference for uncertainty handling
  3. C
    Fixed decisions
  4. D
    Only deterministic inference
Question 25Single Answer
Rule-based reasoning is limited by:
  1. A
    No limitations
  2. B
    Scalability in dynamic environments
  3. C
    Fixed environments
  4. D
    Only static tasks
Question 26Single Answer
Behavior trees in robotics use:
  1. A
    Only action nodes
  2. B
    No nodes
  3. C
    Fixed nodes
  4. D
    Selector and sequence nodes for task control
Question 27Single Answer
Hierarchical task planning optimizes:
  1. A
    Only single tasks
  2. B
    No optimization
  3. C
    Fixed priorities
  4. D
    Task execution via subtask prioritization
Question 28Single Answer
Human-like decision-making under uncertainty uses:
  1. A
    Monte Carlo methods for sampling-based decisions
  2. B
    No sampling
  3. C
    Fixed decisions
  4. D
    Only deterministic methods
Question 29Single Answer
In ARM Cortex-M, what is the purpose of the Nested Vectored Interrupt Controller (NVIC)?
  1. A
    To manage interrupt priorities and handling
  2. B
    To perform floating-point calculations
  3. C
    To execute high-level operating systems
  4. D
    To manage GPU operations
Question 30Single Answer
What is the primary advantage of using Arduino for prototyping robotic systems?
  1. A
    Real-time operating system support
  2. B
    High-performance GPU processing
  3. C
    Ease of use with extensive library support
  4. D
    Advanced memory management
Question 31Single Answer
In a Raspberry Pi, what is the role of the Linux-based operating system?
  1. A
    To execute embedded C code
  2. B
    To perform low-level real-time control
  3. C
    To manage high-level tasks and multitasking
  4. D
    To handle analog-to-digital conversion
Question 32Single Answer
What is a key challenge in using ARM Cortex-M for complex AI tasks in robotics?
  1. A
    Limited computational power for machine learning
  2. B
    Inability to interface with sensors
  3. C
    Lack of interrupt handling
  4. D
    Excessive power consumption
Question 33Single Answer
In NVIDIA Jetson Nano, what is the role of the CUDA cores?
  1. A
    To accelerate parallel computing for AI tasks
  2. B
    To manage low-level I/O operations
  3. C
    To execute real-time control tasks
  4. D
    To handle analog-to-digital conversion
Question 34Single Answer
What is a key difference between Arduino and Raspberry Pi in robotics applications?
  1. A
    Arduino supports GPU processing, while Raspberry Pi does not
  2. B
    Arduino is better for real-time control, while Raspberry Pi supports OS-based tasks
  3. C
    Raspberry Pi is limited to 8-bit processing
  4. D
    Arduino supports operating systems
Question 35Single Answer
In ARM Cortex-A, what is the primary advantage for robotics applications?
  1. A
    Limited peripheral support
  2. B
    Low power consumption for real-time tasks
  3. C
    Support for high-level operating systems and multitasking
  4. D
    Minimal memory addressing
Question 36Single Answer
What is a key limitation of Arduino for high-speed robotic control?
  1. A
    Limited clock speed and processing power
  2. B
    Inability to interface with actuators
  3. C
    Lack of PWM capabilities
  4. D
    Excessive memory availability
Question 37Single Answer
In Raspberry Pi, what is the role of the GPIO pins?
  1. A
    To execute real-time control tasks
  2. B
    To perform GPU-accelerated computing
  3. C
    To interface with sensors and actuators
  4. D
    To handle floating-point calculations
Question 38Single Answer
What is a key challenge in using NVIDIA Jetson Nano for real-time robotic control?
  1. A
    Limited support for real-time operating systems
  2. B
    Inability to run AI algorithms
  3. C
    Lack of GPIO pins
  4. D
    Minimal power consumption
Question 39Single Answer
In ARM Cortex-M, what is the role of the SysTick timer?
  1. A
    To manage GPU operations
  2. B
    To provide precise timing for real-time tasks
  3. C
    To execute high-level operating systems
  4. D
    To perform analog-to-digital conversion
Question 40Single Answer
What is the primary advantage of Raspberry Pi over Arduino for robotics vision tasks?
  1. A
    Low power consumption
  2. B
    Support for high-level processing and OS-based vision libraries
  3. C
    Real-time control capabilities
  4. D
    Limited peripheral support
Question 41Single Answer
In Arduino, what is the role of the Analog-to-Digital Converter (ADC)?
  1. A
    To manage wireless communication
  2. B
    To perform high-performance computing
  3. C
    To convert analog sensor signals to digital
  4. D
    To execute operating systems
Question 42Single Answer
What is a key limitation of ARM Cortex-M for robotics applications requiring multitasking?
  1. A
    Limited GPIO pins
  2. B
    Inability to handle interrupts
  3. C
    Excessive power consumption
  4. D
    Lack of operating system support
Question 43Single Answer
In NVIDIA Jetson Nano, what is the primary advantage for deep learning in robotics?
  1. A
    Minimal power consumption
  2. B
    Low-cost real-time control
  3. C
    GPU-accelerated neural network processing
  4. D
    Limited memory addressing
Question 44Single Answer
What is a key difference between Raspberry Pi and NVIDIA Jetson Nano in robotics?
  1. A
    Jetson Nano is limited to 8-bit processing
  2. B
    Raspberry Pi supports real-time control
  3. C
    Jetson Nano has superior GPU performance for AI tasks
  4. D
    Raspberry Pi has more CUDA cores
Question 45Single Answer
In ARM Cortex-A, what is the role of the Memory Management Unit (MMU)?
  1. A
    To execute embedded C code
  2. B
    To perform real-time control tasks
  3. C
    To handle analog-to-digital conversion
  4. D
    To manage virtual memory for operating systems
Question 46Single Answer
What is a key challenge in using Arduino for high-precision robotic control?
  1. A
    Lack of PWM capabilities
  2. B
    Inability to interface with sensors
  3. C
    Limited ADC resolution and processing speed
  4. D
    Excessive memory availability
Question 47Single Answer
In Raspberry Pi, what is the primary advantage for running ROS nodes?
  1. A
    Minimal power consumption
  2. B
    Real-time control capabilities
  3. C
    Support for Linux-based ROS framework
  4. D
    Limited peripheral support
Question 48Single Answer
What is a key limitation of NVIDIA Jetson Nano for low-power robotics applications?
  1. A
    Lack of GPIO pins
  2. B
    Inability to run AI algorithms
  3. C
    High power consumption for GPU tasks
  4. D
    Limited computational power
Question 49Single Answer
In ARM Cortex-M, what is the role of the Floating-Point Unit (FPU)?
  1. A
    To execute operating systems
  2. B
    To manage interrupt handling
  3. C
    To accelerate floating-point calculations
  4. D
    To perform GPU operations
Question 50Single Answer
What is the primary advantage of using Embedded C for low-level robotic control?
  1. A
    Simplified debugging for complex systems
  2. B
    High-level abstraction for AI tasks
  3. C
    Support for object-oriented programming
  4. D
    Direct hardware access and efficiency
Important Questions Package

Robotics Engineering Exam Online Question Bank Package

Buy Robotics Engineering Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in Robotics Engineering question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.Robotics Engineering Exam - English
Description : 1000 Question With Answer
₹101 [₹500]
2.Robotics Engineering Exam - English
Description : 2000 Question With Answer
₹151 [₹500]
3.Robotics Engineering Exam - English
Description : 3000 Question With Answer
₹181 [₹500]
4.Robotics Engineering Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹550]
5.Robotics Engineering Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹650]
Back to Exam