The target material in the anode is typically made of:
A
Lead
B
Tungsten
C
Copper
D
Aluminum
Question 4Single Answer
What controls the energy (quality) of the X-ray beam?
A
Tube current (mA)
B
Tube voltage (kVp)
C
Filtration
D
Exposure time
Question 5Single Answer
What determines the number (quantity) of X-rays produced?
A
mA and exposure time
B
Filtration
C
Collimation
D
kVp
Question 6Single Answer
The term "bremsstrahlung" refers to:
A
Characteristic X-rays
B
Scattering of X-rays
C
X-rays produced when electrons decelerate upon interacting with the nucleus
D
Heat generation in the X-ray tube
Question 7Single Answer
Characteristic X-rays are produced when:
A
Electrons are deflected by the nucleus
B
Electrons transition between inner atomic shells
C
Scattered X-rays exit the patient
D
The anode spins
Question 8Single Answer
The efficiency of X-ray production in an X-ray tube is approximately:
A
1%
B
50%
C
99%
D
25%
Question 9Single Answer
The heel effect results in:
A
Uniform X-ray intensity
B
Higher intensity on the cathode side
C
Higher intensity on the anode side
D
Reduced X-ray production
Question 10Single Answer
Which factor reduces the heat load on the anode?
A
Increasing kVp
B
Using a rotating anode
C
Increasing mA
D
Prolonging exposure time
Question 11Single Answer
Which interaction predominates at lower X-ray energies?
A
Compton scattering
B
Photoelectric effect
C
Pair production
D
Coherent scattering
Question 12Single Answer
The photoelectric effect is more likely to occur in:
A
Low atomic number materials
B
High atomic number materials
C
Air
D
Fatty tissues
Question 13Single Answer
Compton scattering primarily affects:
A
Image contrast
B
Patient dose
C
Radiation protection
D
All of the above
Question 14Single Answer
Pair production occurs when the photon energy exceeds:
A
1.02 MeV
B
10 keV
C
100 keV
D
0.5 MeV
Question 15Single Answer
What interaction dominates in diagnostic radiology (20-150 keV range)?
A
Coherent scattering
B
Pair production
C
Photoelectric effect and Compton scattering
D
Bremsstrahlung
Question 16Single Answer
Tissue contrast in an X-ray image depends on:
A
kVp settings
B
Photoelectric absorption differences
C
Tissue density and atomic number
D
All of the above
Question 17Single Answer
Which factor increases Compton scattering?
A
Lower kVp
B
High tissue density
C
Low tissue atomic number
D
Shorter exposure time
Question 18Single Answer
High atomic number materials are used for radiographic contrast because they:
A
Scatter X-rays
B
Absorb X-rays via the photoelectric effect
C
Reflect X-rays
D
Generate characteristic radiation
Question 19Single Answer
Air appears dark on an X-ray image because:
A
It scatters all X-rays
B
It absorbs most X-rays
C
It allows most X-rays to pass through
D
It interacts via pair production
Question 20Single Answer
Grid use in X-ray imaging reduces:
A
Patient dose
B
Compton scatter reaching the detector
C
Image contrast
D
Radiation intensity
Question 21Single Answer
Increasing kVp results in:
A
Increased photoelectric absorption
B
Reduced image contrast
C
Increased patient dose
D
Reduced beam penetration
Question 22Single Answer
Contrast agents like iodine are used to enhance:
A
X-ray beam intensity
B
X-ray tube efficiency
C
Visibility of low-contrast tissues
D
Patient comfort
Question 23Single Answer
A high contrast X-ray image requires:
A
High kVp and low mA
B
Low kVp and high mA
C
Low filtration
D
High grid ratio
Question 24Single Answer
Reducing the focal spot size in the X-ray tube improves:
A
Heat tolerance
B
Image sharpness
C
Beam penetration
D
Patient dose
Question 25Single Answer
The main purpose of filtration in X-ray machines is to:
A
Increase patient dose
B
Harden the X-ray beam by removing low-energy photons
C
Improve image contrast
D
Reduce exposure time
Question 26Single Answer
What is the effect of increasing the distance between the X-ray tube and the patient?
A
Increases magnification
B
Reduces patient dose
C
Increases beam divergence
D
Decreases image resolution
Question 27Single Answer
The inverse square law in radiography states that:
A
Radiation intensity is inversely proportional to the square of the distance from the source
B
Radiation intensity is inversely proportional to the distance
C
Image contrast decreases with increased distance
D
Beam quality decreases with increased distance
Question 28Single Answer
Collimators are used in radiography to:
A
Increase beam intensity
B
Improve image resolution
C
Restrict the X-ray beam to the area of interest
D
Increase scatter radiation
Question 29Single Answer
The spatial resolution of an X-ray image depends on:
A
The focal spot size
B
Detector resolution
C
The distance between the source, object, and detector
D
All of the above
Question 30Single Answer
Motion artifacts in X-ray images can be minimized by:
A
Increasing mA
B
Increasing exposure time
C
Using shorter exposure times
D
Increasing the distance between the patient and the detector
Question 31Single Answer
The primary reason for using lead aprons in radiography is to:
A
Reduce image contrast
B
Absorb scattered radiation and protect personnel
C
Increase patient dose
D
Enhance beam collimation
Question 32Single Answer
Occupational radiation exposure is most effectively monitored using:
A
Lead aprons
B
Dosimeters
C
Thyroid shields
D
Film badges
Question 33Single Answer
A primary barrier in radiography rooms is designed to:
A
Absorb primary radiation
B
Shield against scattered radiation only
C
Reduce patient exposure
D
Increase the quality of the X-ray beam
Question 34Single Answer
The ALARA principle in radiography stands for:
A
As Low As Reasonably Achievable
B
As Large As Radiation Allows
C
Allowable Levels of Radiation Absorption
D
Achievable Levels of Radiographic Accuracy
Question 35Single Answer
What is the purpose of the automatic exposure control (AEC) in X-ray machines?
A
Reduce scatter radiation
B
Maintain optimal image quality by adjusting exposure time
C
Increase beam intensity
D
Improve spatial resolution
Question 36Single Answer
The rotating anode in X-ray tubes is used to:
A
Increase the efficiency of X-ray production
B
Distribute heat over a larger surface area
C
Reduce beam divergence
D
Improve contrast resolution
Question 37Single Answer
Regular calibration of X-ray machines is essential to:
A
Maintain consistent image quality and patient safety
B
Increase patient dose
C
Reduce operator workload
D
Enhance image contrast
Question 38Single Answer
The filtration of an X-ray beam removes:
A
High-energy photons
B
Low-energy photons that contribute to patient dose but not image quality
C
All photons above the threshold energy
D
Only scattered photons
Question 39Single Answer
The role of a collimator in an X-ray system includes:
A
Increasing patient dose
B
Reducing scattered radiation and improving image contrast
C
Removing high-energy X-rays
D
Enhancing detector sensitivity
Question 40Single Answer
Digital radiography offers the advantage of:
A
Reduced radiation dose compared to film radiography
B
Automatic image enhancement
C
Immediate image review
D
All of the above
Question 41Single Answer
Flat-panel detectors are commonly used in:
A
Conventional film-screen radiography
B
Digital radiography
C
Computed tomography
D
Magnetic resonance imaging
Question 42Single Answer
Image noise in digital radiography can be reduced by:
A
Increasing mA
B
Decreasing kVp
C
Using smaller focal spot sizes
D
Increasing detector sensitivity
Question 43Single Answer
PACS (Picture Archiving and Communication System) is used for:
A
Storing and transmitting digital radiographic images
B
Collimation of X-rays
C
Reducing scattered radiation
D
Enhancing beam quality
Question 44Single Answer
In computed radiography, the imaging plate is coated with:
A
Lead
B
Photostimulable phosphor
C
Silver halide crystals
D
Tungsten
Question 45Single Answer
Grid cut-off artifacts occur due to:
A
Incorrect grid alignment
B
Low kVp settings
C
Excessive mA
D
Motion blur
Question 46Single Answer
Quantum mottle is caused by:
A
Insufficient X-ray photons reaching the detector
B
High-energy X-rays
C
Scatter radiation
D
Excessive collimation
Question 47Single Answer
A blurred X-ray image can be caused by:
A
Patient movement during exposure
B
Large focal spot size
C
Long exposure time
D
All of the above
Question 48Single Answer
The most common cause of repeated radiographs is:
A
Improper collimation
B
Patient positioning errors
C
Low mA settings
D
Excessive kVp
Question 49Single Answer
Overexposure artifacts in digital radiography appear as:
A
Blackened images with loss of detail
B
Underexposed, noisy images
C
Increased spatial resolution
D
Uniformly gray images
Question 50Single Answer
The ALARA principle in radiology refers to:
A
Reducing image resolution
B
Maintaining radiation exposure As Low As Reasonably Achievable
C
Increasing patient dose for better images
D
Using the highest dose permissible
Important Questions Package
OPSC Assistant Professor Radiodiagnosis Exam Online Question Bank Package
Buy OPSC Assistant Professor Radiodiagnosis Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in OPSC Assistant Professor Radiodiagnosis question bank 2026 in Online, PDF & Print study material.
+ Free Monthly Current Affairs, GK & more PDF Download
Sr.
Package Name
Amount
1.
OPSC Assistant Professor (Radiodiagnosis) Exam - English
Description : 1000 Question With Answer
₹101[₹500]
2.
OPSC Assistant Professor (Radiodiagnosis) Exam - English
Description : 2000 Question With Answer
₹151[₹500]
3.
OPSC Assistant Professor (Radiodiagnosis) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151[₹550]
4.
OPSC Assistant Professor (Radiodiagnosis) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390[₹650]
Radiodiagnosis
Question 51Single Answer
Lead aprons primarily protect against:
A
Scatter radiation
B
Direct X-ray beams
C
Gamma radiation
D
Neutron radiation
Question 52Single Answer
The unit of radiation exposure in air is:
A
Gray (Gy)
B
Sievert (Sv)
C
Roentgen (R)
D
Becquerel (Bq)
Question 53Single Answer
A dosimeter is used to:
A
Monitor the temperature of X-ray tubes
B
Measure radiation dose received by personnel
C
Improve image quality
D
Optimize patient positioning
Question 54Single Answer
Which protective device is used to reduce thyroid exposure during radiography?
A
Lead apron
B
Thyroid shield
C
Collimator
D
Gonadal shield
Question 55Single Answer
The maximum permissible dose for radiology personnel annually is:
A
50 mSv
B
100 mSv
C
5 mSv
D
20 mSv
Question 56Single Answer
Which material is most commonly used for radiation shielding in radiology rooms?
A
Aluminum
B
Copper
C
Lead
D
Steel
Question 57Single Answer
Radiation badges measure exposure using:
A
Scintillation counters
B
Thermoluminescent detectors (TLDs)
C
Photographic film
D
Geiger-Müller counters
Question 58Single Answer
The purpose of collimation in radiography is to:
A
Increase patient dose
B
Reduce the field size and scatter radiation
C
Improve the quality of the X-ray tube
D
Enhance beam intensity
Question 59Single Answer
Gonadal shielding is most effective when placed:
A
Directly on the X-ray tube
B
Over the patient’s gonads during imaging
C
Near the detector
D
Between the patient and the grid
Question 60Single Answer
The unit of effective dose is:
A
Gray (Gy)
B
Sievert (Sv)
C
Roentgen (R)
D
Becquerel (Bq)
Question 61Single Answer
The primary purpose of beam filtration is to:
A
Increase image noise
B
Remove low-energy X-rays that contribute to patient dose
C
Reduce the intensity of the primary beam
D
Increase scatter radiation
Question 62Single Answer
Which device measures the cumulative radiation dose received over time?
A
Geiger counter
B
Ionization chamber
C
Film badge dosimeter
D
Collimator
Question 63Single Answer
Which organ is most sensitive to radiation?
A
Bone
B
Thyroid
C
Skin
D
Lens of the eye
Question 64Single Answer
The “ten-day rule” in radiology refers to:
A
Performing X-rays only during the first 10 days of the menstrual cycle for women of childbearing age
B
Calibrating X-ray machines every 10 days
C
Monitoring radiation exposure every 10 days
D
Performing maintenance checks on protective devices
Question 65Single Answer
The contrast of an X-ray image is primarily determined by:
A
mA
B
kVp
C
Exposure time
D
Focal spot size
Question 66Single Answer
Increasing the mA in X-ray imaging results in:
A
Higher contrast
B
Greater X-ray photon production
C
Reduced patient dose
D
Increased scatter
Question 67Single Answer
The relationship between kVp and image contrast is:
A
Higher kVp increases contrast
B
Higher kVp decreases contrast
C
kVp has no effect on contrast
D
Contrast is determined only by mA
Question 68Single Answer
Spatial resolution in digital radiography depends on:
A
Detector pixel size
B
Beam filtration
C
kVp and mA settings
D
Patient positioning
Question 69Single Answer
Which factor is most critical in reducing image noise?
A
Lower mA
B
Increased exposure time
C
Higher kVp
D
Reduced scatter
Question 70Single Answer
Motion blur in radiography can be minimized by:
A
Increasing exposure time
B
Using shorter exposure times
C
Increasing kVp
D
Decreasing mA
Question 71Single Answer
Grid usage in X-ray imaging helps:
A
Increase image contrast by reducing scatter radiation
B
Enhance beam penetration
C
Decrease patient dose
D
Improve spatial resolution
Question 72Single Answer
Focal spot size affects:
A
Beam filtration
B
Image sharpness and resolution
C
Radiation dose
D
Scatter radiation
Question 73Single Answer
Quantum mottle in digital X-rays occurs due to:
A
Insufficient X-ray photons reaching the detector
B
Overexposure
C
High mA settings
D
Poor collimation
Question 74Single Answer
Increasing the distance between the X-ray tube and the detector results in:
A
Reduced image sharpness
B
Reduced radiation intensity due to the inverse square law
C
Increased patient dose
D
Greater scatter
Question 75Single Answer
What does "signal-to-noise ratio" (SNR) represent in radiography?
A
Image sharpness
B
Image contrast
C
Clarity of the image against background noise
D
Radiation dose
Question 76Single Answer
High contrast images are typically achieved using:
A
High kVp and low mA
B
Low kVp and high mA
C
High exposure time
D
Grid usage
Question 77Single Answer
Scatter radiation is reduced by:
A
Using anti-scatter grids
B
Increasing mA
C
Using larger field sizes
D
Lowering kVp
Question 78Single Answer
The "penumbra" in an X-ray image refers to:
A
Central sharp area of the image
B
Blurred edge of the image
C
Overexposed area
D
Underexposed area
Question 79Single Answer
The relationship between field size and scatter is:
A
Smaller field sizes increase scatter
B
Smaller field sizes reduce scatter
C
Field size does not affect scatter
D
Larger field sizes reduce scatter
Question 80Single Answer
The primary function of a radiation monitoring badge is to:
A
Protect against radiation exposure
B
Measure accumulated radiation dose over time
C
Enhance image quality
D
Monitor patient dose
Question 81Single Answer
Protective barriers in radiology rooms are designed based on:
A
The type and frequency of radiological procedures
B
The age of the patients
C
The energy output of the X-ray machine
D
Both a and c
Question 82Single Answer
Which of the following reduces radiation exposure to the radiographer?
A
Increasing exposure time
B
Standing behind a lead shield
C
Using a high kVp technique without filtration
D
Increasing the X-ray tube current
Question 83Single Answer
Which of these is a personal protective device in radiology?
A
Collimator
B
Dosimeter
C
Thyroid collar
D
Ionization chamber
Question 84Single Answer
The term “occupational dose” refers to:
A
Radiation received during diagnostic imaging procedures
B
Radiation received by radiology staff as part of their work
C
The total dose received by a patient
D
Radiation exposure in industrial environments
Question 85Single Answer
The sharpness of an X-ray image depends on:
A
Tube current (mA)
B
Focal spot size
C
Use of grid
D
Exposure time
Question 86Single Answer
What happens to image noise when mAs is increased?
A
Noise decreases
B
Noise increases
C
Noise remains unchanged
D
Noise depends only on kVp
Question 87Single Answer
Which factor improves image contrast in X-ray imaging?
A
Increasing kVp
B
Decreasing field size
C
Increasing exposure time
D
Using low mA
Question 88Single Answer
Magnification in X-ray images can be minimized by:
A
Increasing the object-to-detector distance
B
Increasing the source-to-object distance
C
Using a smaller focal spot
D
Using low kVp
Question 89Single Answer
A high signal-to-noise ratio (SNR) results in:
A
Blurred images
B
High-quality, clear images
C
Increased radiation dose to the patient
D
Reduced spatial resolution
Question 90Single Answer
Which of these factors reduces quantum mottle?
A
Increasing kVp
B
Increasing the mAs
C
Decreasing the focal spot size
D
Using a lower exposure time
Question 91Single Answer
Collimation is used in radiography to:
A
Focus the X-ray beam
B
Increase image noise
C
Reduce scatter radiation and improve contrast
D
Enhance image sharpness
Question 92Single Answer
The spatial resolution of an X-ray image increases when:
A
The detector pixel size decreases
B
The focal spot size increases
C
The exposure time increases
D
The tube voltage decreases
Question 93Single Answer
The term "grid ratio" refers to:
A
The ratio of primary to scatter radiation
B
The ratio of grid height to the width of interspaces
C
The ratio of patient dose to image quality
D
The thickness of the lead strips in the grid
Question 94Single Answer
What effect does a higher grid ratio have on image quality?
A
Increases scatter radiation
B
Improves contrast by reducing scatter radiation
C
Reduces spatial resolution
D
Increases quantum mottle
Question 95Single Answer
The most effective way to reduce patient dose in radiography is:
A
Increase kVp and reduce mAs
B
Reduce kVp and increase mAs
C
Increase exposure time
D
Decrease source-to-object distance
Question 96Single Answer
Which method reduces scatter radiation during X-ray imaging?
A
Increasing the X-ray tube current
B
Using beam limiting devices
C
Increasing exposure time
D
Reducing source-to-object distance
Question 97Single Answer
High contrast images are generally associated with:
A
Low kVp techniques
B
High kVp techniques
C
Increased exposure time
D
Large field size
Question 98Single Answer
The inverse square law in radiography states that:
A
Radiation intensity decreases proportionally to the square of the distance from the source
B
Radiation intensity increases proportionally to the square of the distance from the source
C
Scatter radiation depends on the square of the field size
D
Patient dose increases with higher kVp
Question 99Single Answer
Reducing the source-to-image distance (SID) will:
A
Increase image sharpness
B
Reduce image magnification
C
Increase radiation intensity at the detector
D
Decrease patient dose
Question 100Single Answer
The primary function of an intensifying screen in radiography is to:
A
Reduce scatter radiation
B
Enhance image contrast
C
Convert X-rays to visible light to reduce patient dose
D
Provide magnified images
Question 101Single Answer
Which bone forms the medial wall of the orbit?
A
Maxilla
B
Ethmoid
C
Sphenoid
D
Zygomatic
Question 102Single Answer
On a coronal CT scan, which structure is located posterior to the trachea?
A
Thyroid gland
B
Esophagus
C
Aorta
D
Superior vena cava
Question 103Single Answer
Which muscle is seen as a triangular structure in the axilla on axial CT images?
A
Pectoralis major
B
Subscapularis
C
Latissimus dorsi
D
Teres major
Question 104Single Answer
What is the primary blood supply to the liver?
A
Hepatic artery
B
Celiac trunk
C
Hepatic vein
D
Portal vein
Question 105Single Answer
Which structure is located in the anterior cranial fossa on a sagittal MRI?
A
Pituitary gland
B
Cerebellum
C
Frontal lobe
D
Pons
Question 106Single Answer
On a chest X-ray, which structure forms the right heart border?
A
Left atrium
B
Right atrium
C
Left ventricle
D
Right ventricle
Question 107Single Answer
Which nerve runs through the carpal tunnel?
A
Ulnar nerve
B
Median nerve
C
Radial nerve
D
Musculocutaneous nerve
Question 108Single Answer
On an axial CT scan of the brain, which structure is located in the midline?
A
Lateral ventricle
B
Thalamus
C
Third ventricle
D
Caudate nucleus
Question 109Single Answer
Which artery supplies the medial aspect of the cerebral hemispheres?
A
Middle cerebral artery
B
Anterior cerebral artery
C
Posterior cerebral artery
D
Basilar artery
Question 110Single Answer
On a coronal MRI of the pelvis, which structure lies posterior to the bladder in males?
A
Prostate
B
Ureter
C
Rectum
D
Seminal vesicles
Question 111Single Answer
Which bone forms the lateral wall of the nasal cavity?
A
Ethmoid
B
Sphenoid
C
Maxilla
D
Palatine
Question 112Single Answer
On a chest X-ray, which structure forms the left heart border?
A
Left atrium
B
Right atrium
C
Left ventricle
D
Right ventricle
Question 113Single Answer
Which structure is located in the posterior cranial fossa on a sagittal MRI?
A
Cerebellum
B
Frontal lobe
C
Pituitary gland
D
Thalamus
Question 114Single Answer
What is the primary blood supply to the stomach?
A
Renal artery
B
Superior mesenteric artery
C
Inferior mesenteric artery
D
Celiac trunk
Question 115Single Answer
On an axial CT scan of the abdomen, which structure lies anterior to the pancreas?
A
Stomach
B
Spleen
C
Duodenum
D
Aorta
Question 116Single Answer
Which nerve innervates the diaphragm?
A
Vagus nerve
B
Intercostal nerve
C
Phrenic nerve
D
Subcostal nerve
Question 117Single Answer
On a coronal MRI of the knee, which structure connects the femur to the tibia?
A
Patellar tendon
B
Meniscus
C
Anterior cruciate ligament
D
Quadriceps tendon
Question 118Single Answer
Which artery supplies the posterior aspect of the cerebral hemispheres?
A
Anterior cerebral artery
B
Middle cerebral artery
C
Posterior cerebral artery
D
Basilar artery
Question 119Single Answer
On a chest X-ray, which structure forms the diaphragmatic dome?
A
Heart
B
Diaphragm
C
Lungs
D
Liver
Question 120Single Answer
Which bone forms the floor of the orbit?
A
Maxilla
B
Ethmoid
C
Sphenoid
D
Zygomatic
Question 121Single Answer
On an axial CT scan of the pelvis, which structure lies lateral to the rectum?
A
Bladder
B
Uterus
C
Prostate
D
Iliac vessels
Question 122Single Answer
Which structure is seen as a midline structure on a coronal MRI of the brain?
A
Lateral ventricle
B
Caudate nucleus
C
Third ventricle
D
Thalamus
Question 123Single Answer
What is the primary blood supply to the kidneys?
A
Superior mesenteric artery
B
Celiac trunk
C
Renal artery
D
Inferior mesenteric artery
Question 124Single Answer
On a sagittal MRI of the spine, which structure lies posterior to the spinal cord?
A
Vertebral body
B
Intervertebral disc
C
Lamina
D
Spinous process
Question 125Single Answer
Which nerve innervates the biceps brachii muscle?
A
Median nerve
B
Musculocutaneous nerve
C
Radial nerve
D
Ulnar nerve
Question 126Single Answer
On a chest X-ray, which structure forms the costophrenic angle?
A
Heart
B
Lungs
C
Diaphragm
D
Ribs
Question 127Single Answer
Which structure is located in the middle cranial fossa on a sagittal MRI?
A
Frontal lobe
B
Cerebellum
C
Pituitary gland
D
Pons
Question 128Single Answer
On an axial CT scan of the abdomen, which structure lies posterior to the kidneys?
A
Pancreas
B
Aorta
C
Spleen
D
Quadratus lumborum
Question 129Single Answer
Which artery supplies the lateral aspect of the cerebral hemispheres?
A
Anterior cerebral artery
B
Middle cerebral artery
C
Posterior cerebral artery
D
Basilar artery
Question 130Single Answer
On a coronal MRI of the pelvis, which structure lies superior to the bladder in females?
A
Uterus
B
Rectum
C
Ovaries
D
Vagina
Question 131Single Answer
What is the primary function of the glomerular filtration barrier?
A
Reabsorb nutrients
B
Store urine
C
Secrete hormones
D
Filter blood plasma
Question 132Single Answer
Which hormone regulates calcium levels in the blood?
A
Parathyroid hormone
B
Insulin
C
Cortisol
D
Thyroxine
Question 133Single Answer
What is the primary pathophysiological mechanism of pulmonary edema?
A
Increased venous return
B
Decreased cardiac output
C
Increased capillary permeability
D
Decreased pulmonary pressure
Question 134Single Answer
Which structure regulates blood pressure through the renin-angiotensin system?
A
Liver
B
Kidneys
C
Lungs
D
Heart
Question 135Single Answer
What is the primary cause of atelectasis on a chest X-ray?
A
Pneumothorax
B
Pulmonary edema
C
Airway obstruction
D
Pleural effusion
Question 136Single Answer
Which hormone is responsible for regulating blood glucose levels?
A
Insulin
B
Glucagon
C
Both A and B
D
Cortisol
Question 137Single Answer
What is the primary pathophysiological mechanism of pneumothorax?
A
Air in the pleural space
B
Fluid in the pleural space
C
Increased pulmonary pressure
D
Decreased cardiac output
Question 138Single Answer
Which structure regulates sodium and water balance in the body?
A
Liver
B
Kidneys
C
Pancreas
D
Adrenal glands
Question 139Single Answer
What is the primary cause of pleural effusion seen on imaging?
A
Airway obstruction
B
Pulmonary edema
C
Fluid accumulation in the pleural space
D
Pneumothorax
Question 140Single Answer
Which hormone is responsible for erythropoiesis?
A
Insulin
B
Thyroxine
C
Cortisol
D
Erythropoietin
Question 141Single Answer
What is the primary pathophysiological mechanism of cerebral edema?
A
Increased capillary permeability
B
Decreased cerebral blood flow
C
Increased intracranial pressure
D
Decreased CSF production
Question 142Single Answer
Which structure regulates acid-base balance in the body?
A
Lungs
B
Both A and B
C
Liver
D
Kidneys
Question 143Single Answer
What is the primary cause of ascites seen on abdominal imaging?
A
Cardiac tamponade
B
Renal failure
C
Pulmonary edema
D
Portal hypertension
Question 144Single Answer
Which hormone is responsible for regulating blood pressure?
A
Insulin
B
Glucagon
C
Thyroxine
D
Aldosterone
Question 145Single Answer
What is the primary pathophysiological mechanism of myocardial infarction?
A
Increased cardiac output
B
Coronary artery occlusion
C
Decreased venous return
D
Pulmonary edema
Question 146Single Answer
Which structure regulates body temperature?
A
Hypothalamus
B
Pituitary gland
C
Thyroid gland
D
Adrenal glands
Question 147Single Answer
What is the primary cause of pulmonary embolism seen on CT pulmonary angiography?
A
Airway obstruction
B
Pleural effusion
C
Thrombus in pulmonary arteries
D
Pneumothorax
Question 148Single Answer
Which hormone is responsible for regulating metabolism?
A
Thyroxine
B
Insulin
C
Cortisol
D
Glucagon
Question 149Single Answer
What is the primary pathophysiological mechanism of hydrocephalus?
A
Increased CSF production
B
Obstruction of CSF flow
C
Decreased CSF absorption
D
All of the above
Question 150Single Answer
Which structure regulates blood volume?
A
Kidneys
B
Liver
C
Lungs
D
Heart
Question 151Single Answer
What is the primary cause of a brain abscess seen on MRI?
A
Bacterial infection
B
All of the above
C
Fungal infection
D
Viral infection
Question 152Single Answer
Which hormone is responsible for regulating stress response?
A
Insulin
B
Cortisol
C
Thyroxine
D
Glucagon
Question 153Single Answer
What is the primary pathophysiological mechanism of stroke?
A
Decreased intracranial pressure
B
Increased cerebral blood flow
C
Cerebral artery occlusion
D
Pulmonary edema
Question 154Single Answer
Which structure regulates oxygen levels in the blood?
A
Heart
B
Kidneys
C
Liver
D
Lungs
Question 155Single Answer
What is the primary cause of pneumothorax seen on chest X-ray?
A
Airway obstruction
B
Fluid in the pleural space
C
Pulmonary edema
D
Air in the pleural space
Question 156Single Answer
What is the primary source of X-rays in a radiographic tube?
A
Cathode
B
Anode
C
Filament
D
Collimator
Question 157Single Answer
Which parameter controls the energy of X-rays?
A
mAs
B
kVp
C
Focal spot size
D
Filtration
Question 158Single Answer
What is the primary advantage of CT over conventional X-ray?
A
Lower radiation dose
B
Lower cost
C
Faster imaging time
D
Better soft tissue contrast
Question 159Single Answer
Which imaging modality uses magnetic fields and radio waves?
A
X-ray
B
MRI
C
CT
D
Ultrasound
Question 160Single Answer
What is the primary source of contrast in T1-weighted MRI?
A
T1 relaxation time
B
Proton density
C
T2 relaxation time
D
Magnetic susceptibility
Question 161Single Answer
Which ultrasound mode is used to assess blood flow?
A
Doppler
B
B-mode
C
M-mode
D
A-mode
Question 162Single Answer
What is the primary isotope used in PET imaging?
A
Iodine-131
B
Fluorine-18
C
Technetium-99m
D
Gallium-67
Question 163Single Answer
Which parameter controls the quantity of X-rays?
A
kVp
B
mAs
C
Focal spot size
D
Filtration
Question 164Single Answer
What is the primary advantage of MRI over CT?
A
Faster imaging time
B
Lower cost
C
No ionizing radiation
D
Better bone visualization
Question 165Single Answer
Which imaging modality uses high-frequency sound waves?
A
X-ray
B
CT
C
MRI
D
Ultrasound
Question 166Single Answer
What is the primary source of contrast in T2-weighted MRI?
A
T2 relaxation time
B
T1 relaxation time
C
Proton density
D
Magnetic susceptibility
Question 167Single Answer
Which isotope is commonly used in bone scans?
A
Iodine-131
B
Gallium-67
C
Fluorine-18
D
Technetium-99m
Question 168Single Answer
What is the primary function of a collimator in X-ray imaging?
A
Increase X-ray energy
B
Reduce scatter radiation
C
Focus X-rays
D
Increase image contrast
Question 169Single Answer
Which CT parameter controls image resolution?
A
kVp
B
Slice thickness
C
mAs
D
Pitch
Question 170Single Answer
What is the primary advantage of ultrasound over CT?
A
Better soft tissue contrast
B
No ionizing radiation
C
Faster imaging time
D
Better bone visualization
Question 171Single Answer
Which MRI sequence is best for detecting edema?
A
T1-weighted
B
Gradient echo
C
Proton density
D
T2-weighted
Question 172Single Answer
What is the primary source of radiation in nuclear medicine?
A
X-rays
B
Ultrasound waves
C
Gamma rays
D
Magnetic fields
Question 173Single Answer
Which parameter improves image contrast in X-ray imaging?
A
kVp
B
mAs
C
Focal spot size
D
Filtration
Question 174Single Answer
What is the primary advantage of PET over SPECT?
A
Lower radiation dose
B
Better spatial resolution
C
Lower cost
D
Faster imaging time
Question 175Single Answer
Which ultrasound parameter controls depth of penetration?
A
Frequency
B
Gain
C
Time-gain compensation
D
Focal zone
Question 176Single Answer
What is the primary source of contrast in CT imaging?
A
Proton density
B
Electron density
C
T1 relaxation time
D
T2 relaxation time
Question 177Single Answer
Which isotope is used in thyroid imaging?
A
Technetium-99m
B
Iodine-131
C
Fluorine-18
D
Gallium-67
Question 178Single Answer
What is the primary function of a grid in X-ray imaging?
A
Increase X-ray energy
B
Reduce scatter radiation
C
Focus X-rays
D
Increase image contrast
Question 179Single Answer
Which MRI sequence is best for detecting hemorrhage?
A
T1-weighted
B
T2-weighted
C
Gradient echo
D
Proton density
Question 180Single Answer
What is the primary advantage of nuclear medicine over CT?
A
Better anatomical detail
B
Faster imaging time
C
Lower radiation dose
D
Functional imaging
Question 181Single Answer
On a coronal CT scan of the brain, which structure lies superior to the cerebellum?
A
Occipital lobe
B
Pons
C
Medulla
D
Midbrain
Question 182Single Answer
Which artery supplies the head of the pancreas?
A
Celiac trunk
B
Gastroduodenal artery
C
Inferior mesenteric artery
D
Superior mesenteric artery
Question 183Single Answer
On an axial MRI of the knee, which structure lies posterior to the femur?
A
Popliteal fossa
B
Patella
C
Tibia
D
Fibula
Question 184Single Answer
Which nerve innervates the quadriceps femoris muscle?
A
Tibial nerve
B
Femoral nerve
C
Sciatic nerve
D
Obturator nerve
Question 185Single Answer
On a chest X-ray, which structure forms the left upper heart border?
A
Left atrium
B
Aortic arch
C
Left ventricle
D
Right atrium
Question 186Single Answer
Which structure lies posterior to the stomach on an axial CT scan?
A
Spleen
B
Pancreas
C
Liver
D
Duodenum
Question 187Single Answer
What is the primary pathophysiological mechanism of cirrhosis?
A
Portal hypertension
B
Hepatic fibrosis
C
Hepatocellular carcinoma
D
Hepatic steatosis
Question 188Single Answer
Which hormone regulates water reabsorption in the kidneys?
A
Aldosterone
B
Cortisol
C
Antidiuretic hormone
D
Erythropoietin
Question 189Single Answer
What is the primary cause of a brain tumor seen on MRI?
A
Ischemia
B
Infection
C
Hemorrhage
D
Neoplastic growth
Question 190Single Answer
Which structure regulates blood glucose levels through insulin secretion?
A
Adrenal glands
B
Liver
C
Kidneys
D
Pancreas
Question 191Single Answer
What is the primary pathophysiological mechanism of emphysema?
A
Pulmonary edema
B
Airway obstruction
C
Alveolar destruction
D
Pleural effusion
Question 192Single Answer
Which hormone regulates bone metabolism?
A
Insulin
B
Parathyroid hormone
C
Cortisol
D
Thyroxine
Question 193Single Answer
What is the primary cause of a subdural hematoma seen on CT?
A
Arterial rupture
B
CSF leak
C
Venous bleeding
D
Tumor growth
Question 194Single Answer
Which structure regulates blood pH through bicarbonate?
A
Lungs
B
Heart
C
Liver
D
Kidneys
Question 195Single Answer
What is the primary pathophysiological mechanism of aortic dissection?
A
Intimal tear
B
Aneurysm rupture
C
Thrombosis
D
Embolism
Question 196Single Answer
Which parameter controls the brightness of an X-ray image?
A
mAs
B
kVp
C
Focal spot size
D
Filtration
Question 197Single Answer
What is the primary advantage of CT angiography over conventional angiography?
A
Faster imaging time
B
Lower cost
C
Non-invasive
D
Better soft tissue contrast
Question 198Single Answer
Which MRI sequence is best for detecting tumors?
A
T1-weighted
B
T2-weighted
C
Proton density
D
Contrast-enhanced T1-weighted
Question 199Single Answer
Which ultrasound mode is used to assess cardiac motion?
A
B-mode
B
M-mode
C
Doppler
D
A-mode
Question 200Single Answer
What is the primary isotope used in SPECT imaging?