📚 Exam by Category
▾
Objective Questions

Latest ITI Limited Diploma Engineer Exam Question (Objective Questions), MCQ in English

Subjects : English, Electrical Engineering, Reasoning, Quantitative Aptitude, Current Affairs

Question Bank ITI Limited Diploma Engineer Exam (Electrical) - English
Back to Exam

English

Question 1Single Answer
I go to Madurai by —– Vaigai Express
  1. A
    a
  2. B
    an
  3. C
    some
  4. D
    the
Question 2Single Answer
Have the car stolen!
  1. A
    Steal the car
  2. B
    You should have the stolen car
  3. C
    Get someone to steal the car
  4. D
    They have stolen the car
Question 3Single Answer
The payment was collected by the hardworking salesman.
  1. A
    The hardworking salesman collected the payment.
  2. B
    the salesman who worked heard was able to collect the payment.
  3. C
    to collect the payment the salesman had to work hard.
  4. D
    The hardworking salesman was able to collect the payment.
Question 4Single Answer
I had to stop all my work to complete this project.
  1. A
    All other work had to be stopped to complete this project by me
  2. B
    For completing this project all other work must be stopped
  3. C
    For completing this project I had to stop all my work
  4. D
    To complete this project all other work had been stopped by me
Question 5Single Answer
They have published the names of all the successful candidates.
  1. A
    The candidates who have succeeded their names they had published.
  2. B
    The names of all the successful candidates have been published by them
  3. C
    The candidates who have succeeded their names have been published by them.
  4. D
    The names of all the successful candidate were published by them. 
Question 6Single Answer
The online shopping site lowered the prices.
  1. A
    Lowering of the prices was done by the online shopping site
  2. B
    The prices were lowered by the online shopping site
  3. C
    The prices had been lowered by the online shopping site
  4. D
    The prices have been lowered by the online shopping site
Question 7Single Answer
Who taught you to drive a truck ?
  1. A
    To drive a truck by whom were you taught?
  2. B
    Driving a truck by who were you taught?
  3. C
    Driving a truck by who were you being taught?
  4. D
    By whom were you taught to drive a truck?
Question 8Single Answer
We shall invite Suresh.
  1. A
    Suresh would be invited by us
  2. B
    Suresh would have been invited by us
  3. C
    Suresh will be invited by us
  4. D
    Suresh will have been invited by us
Question 9Single Answer
Dark clouds have overcast the evening sky.
  1. A
    By the dark clouds the evening sky was overcast.
  2. B
    The evening sky has been overcast by the dark clouds.
  3. C
    Dark clouds overcastted the evening sky.
  4. D
    The sky of the evening was overcasted by dark clouds.
Question 10Single Answer
The partners will celebrate their triumph tomorrow. 
  1. A
    The triumph would be celebrated by the partners a day before
  2. B
    The triumph would be celebrated by the partners a day after
  3. C
    The triumph would have been celebrated by the partners a day after
  4. D
    The triumph will have been celebrated by the partners tomorrow

Electrical Engineering

Question 11Single Answer
Assuming both the voltage sources are in phase, the value of R for which maximum power is transferred from circuit A to circuit B is
  1. A
    0.8 Ω
  2. B
    1.4 Ω
  3. C
    2 Ω
  4. D
    2.8 Ω
Question 12Single Answer
For the intrinsic gallium-arsenide, the conductivity at room temperature 25°C is 10-6 (ohm-m)-1, the electron and hole nobilities are 0.85 m2/V-s and 0.04 m2/V-s respectively. What is the intrinsic carrier concentration at the room temperature?
  1. A
    7.0 × 1012 m-3
  2. B
    7.0 × 10-12 m-3
  3. C
    7.0 × 10-12 m3
  4. D
    7.0 × 1012 m3
Question 13Single Answer
The resistivity of intrinsic germanium at 30°C is 0.46 –m. What is the intrinsic carrier density at 30°C if the electron mobility is 0.38 m2/V-s and the hole mobility is 0.18 m2/V-s?
  1. A
    9.2 × 105/m3
  2. B
    2.77 × 103/m3
  3. C
    2.43 × 1019/m3
  4. D
    8.9 × 1012/m3
Question 14Single Answer
Heat conduction in a semiconductor takes place
  1. A
    By the mobility of the carriers
  2. B
    Due to energy gap between conduction band and valency band
  3. C
    By the holes and thermal vibrations of atoms
  4. D
    By the electrons and thermal vibrations of atoms
Question 15Single Answer
Brewster angle is the angle when a wave is incident on the surface of a perfect dielectric at which there is no reflected wave and the incident wave is
  1. A
    Parallel polarized
  2. B
    Perpendicularly polarized
  3. C
    Normally polarized
  4. D
    None of the above
Question 16Single Answer
An electrical breakdown of a p-n junction occurs if
  1. A
    Forward voltage increases up to the rating
  2. B
    Reverse voltage increases beyond the rating
  3. C
    Forward voltage decreases below the rating
  4. D
    Reverse voltage decreases below the rating
Question 17Single Answer
The chief deterrent to the widespread application of superconducting materials is
  1. A
    Very difficult to form, machine or case
  2. B
    The difficult in attaining and maintaining extremely low temperature
  3. C
    The poor strength-to-weight ratio
  4. D
    The lower oxidation rate at elevated temperatures
Question 18Single Answer
Which one of the following properties is not observed in the carbon nanotubes ?
  1. A
    High stiffness and strengths
  2. B
    Low densities
  3. C
    Unusual electrical property
  4. D
    Non-ductile
Question 19Single Answer
The evidence for the importance of electron-phonon interaction in super-conductors comes from
  1. A
    Meissner effect
  2. B
    Josephson effect
  3. C
    Isotope effect
  4. D
    x quantization experiments
Question 20Single Answer
Which one of the following materials is used for cable insulation ?
  1. A
    Phenol formaldehyde
  2. B
    Polytetrafluoroethylene
  3. C
    Polyvinyl chloride
  4. D
    Acrylonitrile butadiene styrene
Question 21Single Answer
For high speed reading and storing of information in a computer, the material used is
  1. A
    Ferrite
  2. B
    Piezoelectric
  3. C
    Pyroelectric
  4. D
    Ferromagnetic above 768°C
Question 22Single Answer
The temperature above which an anti-ferromagnetic material becomes paramagnetic is called
  1. A
    Peak temperature
  2. B
    Neel temperatur
  3. C
    Critical temperature
  4. D
    Weiss temperature
Question 23Single Answer
Which effect is the converse of Peltier effect ?
  1. A
    Seeback effect
  2. B
    Thomson effect
  3. C
    Hall effect
  4. D
    Joule effect
Question 24Single Answer
Magnetic materials which may be readily magnetized in either direction are
  1. A
    Soft magnetic materials
  2. B
    Hard magnetic materials
  3. C
    High eddy current loss materials
  4. D
    High hysteresis loss materials
Question 25Single Answer
Consider the following statements regarding a ferromagnetic material:
1.Below the ferromagnetic Curie temperature, the ferromagnetic materials exhibit hysteresis effect.
2.The coercive force is the filed required to reduce the flux density to zero. 
Which of the above statements is/are correct?
  1. A
    Both 1 and 2
  2. B
    Neither 1 nor 2
  3. C
    1 only
  4. D
    2 only
Question 26Single Answer
The impact ionization phenomenon in semiconductor may be viewed as the reverse process of
  1. A
    Radiative recombination
  2. B
    Auger recombination
  3. C
    Surface recombination
  4. D
    Shockley-Read-Hall recombination
Question 27Single Answer
Refractive index of a slice glass can be reduced by doping it with tiny amount of
  1. A
    GeO2
  2. B
    B2O3
  3. C
    P2O5x
  4. D
    Al2O3
Question 28Single Answer
If a diameter of a copper wire is increased by two times keeping its terminal voltage same, then the drift velocity will
  1. A
    Become twice
  2. B
    Become half
  3. C
    ecome four times
  4. D
    Remain unchanged
Question 29Single Answer
In an induction type energy meter, the steady speed attained by the rotating disc is
1.Proportional to the deflecting torque.
2.Proportional to the resistance of the path of eddy currents.
3.Inversely proportional to the effective readings of disc from its axis.
4.Inversely proportional to the square of brake magnetic flux. 
Which of the above are correct?
  1. A
    1, 2 and 3 only
  2. B
    1, 2 and 4 only
  3. C
    2, 3 and 4 only
  4. D
    1, 2, 3 and 4
Question 30Single Answer
If ‘KCLFTSB’ stands for ‘best of  luck’ and ‘SHSWDG’ stands for ‘good wishes’, which of the following indicates ‘ace the exam’?
  1. A
    MCHTX
  2. B
    MXHTC
  3. C
    XMHCT
  4. D
    XMHTC
Question 31Single Answer
Consider  the following statements associated with the basic electrostatic properties of ideal conductors:
1.The resultant field inside is zero.
2.The net charge density in the interior is zero.
3.Any net charges reside on the surface.
4.The surface is always equipotential.
5.The field just outside is zero. 
Which of the above statements are correct?
  1. A
    1, 2, 3 and 4
  2. B
    3, 4 and 5 only
  3. C
    1, 2 and 3 only
  4. D
    2 and 3 only
Question 32Single Answer
A semiconductor device made out of a material having very high temperature coefficient of resistance is
  1. A
    Transistor
  2. B
    Varistor
  3. C
    Thyristor
  4. D
    Thermistor
Question 33Single Answer
The electrical conductivity of a semiconductor increases with increase in temperature because
  1. A
    The carrier concentration increases
  2. B
    The mobility of carrier increases
  3. C
    Both carrier concentration and mobility increases
  4. D
    The band gap decreases
Question 34Single Answer
Which of the following are associated with soft superconductors?
1.Silsbee’s rule
2.Meissner effect
3.Faraday rotation
4.Curie-Weiss law
  1. A
    2, 3 and 4
  2. B
    1 and 3 only
  3. C
    1 and 2 only
  4. D
    2 and 3 only
Question 35Single Answer
In a two-channel oscilloscope operating in x-y mode, two in-phase 50 Hz sinusoidal waveforms of equal amplitude are fed to the two channels. What will be the resultant pattern on the screen?
  1. A
    An ellipse
  2. B
    A parabola
  3. C
    Straight line inclined at 45 with respect to x-axis
  4. D
    A circle
Question 36Single Answer
Materials, whose resistivity at very low temperature plunges from a finite value to zero and remains there upon further cooling, are known as
  1. A
    Ferromagnetic materials
  2. B
    High-energy hard magnetic materials
  3. C
    Superconductors
  4. D
    Ferromagnetic materials
Question 37Single Answer
In a superconductor, is the temperature is decreased below its critical temperature, the value of critical magnetic field will
  1. A
    Increase
  2. B
    Decrease
  3. C
    Not change
  4. D
    Increase or decrease depending on the superconductor material
Question 38Single Answer
The imaginary part of dielectric constant determines
  1. A
    Component of current which is in phase with the applied field
  2. B
    Component of energy absorbed per m3
  3. C
    Amount of applied field
  4. D
    Component of voltage which is in phase with the applied field
Question 39Single Answer
Direction: Each of the items consists of two statements, one labeled as the ‘Statement (I)’ and the other as ‘Statement (II)’. Examine these two statements carefully and select the answers to these items using the codes given below
  1. A
    Statement (I):Hard magnetic materials are used for making permanent magnets.
    Statement (II):
    Hard magnetic materials have relatively small and narrow hysteresis loop.
  2. B
    Both Statement (I) and Statement (II) are individually true and Statement (II) is the correct explanation of Statement (I)
  3. C
    Both Statement (I) and Statement (II) are individually true and Statement (II) is NOT the correct explanation of Statement (I)
  4. D
    Statement (I) is true but Statement (II) is false
  5. E
    Statement (I) is false but Statement (II) is true 
Question 40Single Answer
In 8085A microprocessor, the operation performed by the instruction LHLD 2100 H is                                    
  1. A
    (H) ← 21 H, (L) ←00 
  2. B
    (H) ← M (2100 H), (L) ←M(2101H)
  3. C
    (H) ← M (2100 H), (L) ←M(2100H)
  4. D
    (H) ← 00H, (L) ←21H                                                 
Question 41Single Answer
If the magnetic susceptibility of a specimen is small and positive, the specimen is
  1. A
    Diamagnetic
  2. B
    Paramagnetic
  3. C
    Ferromagnetic
  4. D
    Non-magnetic
Question 42Single Answer
Manganese ferrite is a 1 : 1 mixture of
  1. A
    Manganese nitride and iron oxide
  2. B
    Manganese oxide and iron nitride
  3. C
    Manganese nitride and iron sulphide
  4. D
    Manganese oxide and iron sulphide 
Question 43Single Answer
When a ferromagnetic substance is magnetized, small changes in dimensions occur. Such a phenomenon is known as
  1. A
    Magnetic hysteresis
  2. B
    Magnetic expansion
  3. C
    Magnetostriction
  4. D
    Magneto-calorisation
Question 44Single Answer
In ferromagnetic , anti-ferromagnetic and ferromagnetic materials, the atomic thermal motions counteract the coupling forces between the adjacent atomic dipole moments, thereby causing
  1. A
    Some dipole misalignment regardless of whether an external field is present
  2. B
    Increase in dipole alignment regardless of whether an external field is present
  3. C
    No effect on dipole alignment
  4. D
    Atoms tend to de-randomize the direction of moments 
Question 45Single Answer
The Hall effect voltage in intrinsic silicon
  1. A
    Is positive
  2. B
    Is zero
  3. C
    Is negative
  4. D
    Changes its sign based on application of magnetic field
Question 46Single Answer
Most outstanding property of indium antimonide is
  1. A
    A very wide range gap
  2. B
    High resistivity at room temperature
  3. C
    High carrier mobility
  4. D
    Very low conductivity at room temperature
Question 47Single Answer
Which of the following semiconducting compounds is used in photoconductive devices?
  1. A
    Caesium antimonide
  2. B
    Barium oxide
  3. C
    Lead sulphide
  4. D
    Zinc oxide
Question 48Single Answer
Consider the following transducers:
1.LVDT
2.Piezoelectric
3.Thermocouple
4.Photovoltaic cell
Which of the above are active transducers?
  1. A
    1, 2 and 3
  2. B
    1, 2 and 4
  3. C
    2 and 3 only
  4. D
    2, 3 and 4
Question 49Single Answer
Consider the following statements regarding magnetic materials:
1.A diamagnetic material has no permanent dipole
2.Paramagnetic material has anti-parallel orientation of equal moments with neighboring dipoles
3.Ferrimagnetic material has anti parallel orientation of unequal moments between neighboring dipoles
4.Anti-ferromagnetic material has negligible interaction between neighboring dipoles 
Which of these statements are correct?
  1. A
    1 and 2
  2. B
    3 and 4
  3. C
    2 and 4
  4. D
    1 and 3 
Question 50Single Answer
Consider  the following statements regarding hysteresis loops of hard and soft magnetic materials:
1.Hysteresis loss of hard magnetic material will be less than that of soft material
2.Coercivity of hard materials will be greater than that of soft material
3.Retentivity of the two materials will always be equal
Which of these statements are correct?
  1. A
    1, 2 and 3
  2. B
    2 only
  3. C
    3 only
  4. D
    1 and 3 only 
Important Questions Package

ITI Limited Diploma Engineer Exam Online Question Bank Package

Buy ITI Limited Diploma Engineer Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in ITI Limited Diploma Engineer question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.ITI Limited Diploma Engineer Exam (Electrical) - English
Description : 2500 Question with Answer
₹181 [₹500]
2.ITI Limited Diploma Engineer Exam (Electrical) - Hindi
Description : 2500 Question with Answer
₹181 [₹500]
3.ITI Limited Diploma Engineer Exam (Civil) - English
Description : 2500 Question with Answer
₹181 [₹500]
4.ITI Limited Diploma Engineer Exam (Civil) - Hindi
Description : 2500 Question with Answer
₹181 [₹500]
Back to Exam