📚 Exam by Category
▾
Objective Questions

Latest GATE Naval Architecture and Marine Engineering Exam Question (Objective Questions), MCQ in English

Subjects : Naval Architecture and Marine Engineering

Question Bank GATE Naval Architecture & Marine Engineering Exam (Only MCQ) - English
Back to Exam

Naval Architecture and Marine Engineering

Question 1Single Answer
A marine crane lifts a 50 kN load with a 5 m arm at 30° to the horizontal. Neglecting the crane’s weight, what is the horizontal component of the reaction force at the pivot?
  1. A
    25 kN
  2. B
    50 kN
  3. C
    43.3 kN
  4. D
    86.6 kN
Question 2Single Answer
A ship’s anchor chain exerts a 20 kN force at 45° to the deck. What is the vertical reaction force at the anchor point?
  1. A
    10 kN
  2. B
    14.14 kN
  3. C
    20 kN
  4. D
    28.28 kN
Question 3Single Answer
A floating platform is subjected to a 100 kN vertical load and a 50 kN horizontal load. What is the resultant reaction force magnitude at a pinned support?
  1. A
    150 kN
  2. B
    125 kN
  3. C
    111.8 kN
  4. D
    175 kN
Question 4Single Answer
A ship’s mast is subjected to a wind load of 10 kN at 60° to the vertical. What is the moment about the base if the mast is 8 m tall?
  1. A
    40 kNm
  2. B
    69.28 kNm
  3. C
    80 kNm
  4. D
    100 kNm
Question 5Single Answer
A marine structure with two supports is subjected to a uniformly distributed load of 15 kN/m over a 6 m span. What is the reaction force at each support?
  1. A
    60 kN
  2. B
    45 kN
  3. C
    90 kN
  4. D
    120 kN
Question 6Single Answer
A buoy is anchored with a cable at 30° to the vertical under a 5 kN tension. What is the horizontal force on the buoy?
  1. A
    2.5 kN
  2. B
    4.33 kN
  3. C
    5 kN
  4. D
    8.66 kN
Question 7Single Answer
A ship’s deck beam is subjected to a point load of 20 kN at its midpoint. If the beam is 4 m long and simply supported, what is the reaction force at each support?
  1. A
    40 kN
  2. B
    20 kN
  3. C
    10 kN
  4. D
    80 kN
Question 8Single Answer
A marine platform is in equilibrium under three forces: 50 kN vertically downward, 30 kN horizontally, and an unknown force at 45°. What is the magnitude of the unknown force?
  1. A
    60 kN
  2. B
    58.31 kN
  3. C
    80 kN
  4. D
    100 kN
Question 9Single Answer
A crane on a ship lifts a 100 kN load with a 10 m arm at 45°. What is the moment about the pivot point?
  1. A
    500 kNm
  2. B
    707.1 kNm
  3. C
    1000 kNm
  4. D
    1414.2 kNm
Question 10Single Answer
A marine structure is subjected to two forces: 40 kN at 30° and 60 kN at 60°. What is the resultant force magnitude?
  1. A
    78.1 kN
  2. B
    92.3 kN
  3. C
    100 kN
  4. D
    120 kN
Question 11Single Answer
A marine truss with a pin joint at one end and a roller at the other is subjected to a 50 kN load at a joint. How many unknown reaction forces are there?
  1. A
    3
  2. B
    2
  3. C
    4
  4. D
    5
Question 12Single Answer
In a truss used for a ship’s cargo hold, a member carries a compressive force of 100 kN. If the member length is 2 m and the truss is statically determinate, what is the force in an adjacent member at 45°?
  1. A
    100 kN
  2. B
    70.7 kN
  3. C
    141.4 kN
  4. D
    200 kN
Question 13Single Answer
A marine frame has a fixed support and a pinned support. How many equilibrium equations are available for solving the reactions?
  1. A
    3
  2. B
    4
  3. C
    6
  4. D
    5
Question 14Single Answer
A truss in a marine structure has 10 joints and 16 members. How many reaction forces are there for a statically determinate truss?
  1. A
    2
  2. B
    5
  3. C
    4
  4. D
    3
Question 15Single Answer
A marine truss member is subjected to a tensile force of 80 kN. If the member is inclined at 30° to the horizontal, what is the horizontal component of the force?
  1. A
    40 kN
  2. B
    69.28 kN
  3. C
    80 kN
  4. D
    92.3 kN
Question 16Single Answer
In a marine frame, a vertical load of 60 kN is applied at a joint. If the frame is statically indeterminate to the first degree, how many additional equations are needed?
  1. A
    4
  2. B
    2
  3. C
    3
  4. D
    1
Question 17Single Answer
A truss in a ship’s structure has a zero-force member. Under what condition does a member become a zero-force member?
  1. A
    A joint is subjected to a single force
  2. B
    Three collinear members meet at a joint
  3. C
    Two non-collinear members meet at a joint with no external load
  4. D
    A member is parallel to the load
Question 18Single Answer
A marine truss is subjected to a 100 kN load at a joint. If a member is at 60° to the horizontal, what is the force in that member?
  1. A
    50 kN
  2. B
    86.6 kN
  3. C
    100 kN
  4. D
    173.2 kN
Question 19Single Answer
A frame in a marine structure has a roller support allowing vertical motion. How many reaction forces are provided by the roller?
  1. A
    1
  2. B
    2
  3. C
    3
  4. D
    4
Question 20Single Answer
A truss used in a ship’s hull has 12 members and 8 joints. Is the truss statically determinate?
  1. A
    Depends on supports
  2. B
    No
  3. C
    Depends on loading
  4. D
    Yes
Question 21Single Answer
A marine beam deflects under a 20 kN load at its midpoint. Using the virtual work method, what is the virtual work done by a unit load at the same point?
  1. A
    Equal to the applied load
  2. B
    Zero
  3. C
    Equal to the actual deflection
  4. D
    Equal to the beam length
Question 22Single Answer
In a marine truss, the virtual work method is used to calculate deflection. What is the virtual force in a member with zero actual force?
  1. A
    Equal to the actual load
  2. B
    Zero
  3. C
    Equal to the member length
  4. D
    Non-zero
Question 23Single Answer
A ship’s mast is modeled as a cantilever. Using virtual work, what is the deflection at the tip due to a 10 kN load? (Assume EI is constant)
  1. A
    PL/(EI)
  2. B
    PL²/(2EI)
  3. C
    PL³/(3EI)
  4. D
    P/(EI)
Question 24Single Answer
In a marine frame, the virtual work method is applied to find the horizontal displacement. What is the contribution of a member under pure compression?
  1. A
    Zero
  2. B
    Equal to the member length
  3. C
    Equal to the axial load
  4. D
    Non-zero
Question 25Single Answer
A marine structure’s beam is subjected to a distributed load. Using virtual work, what is the virtual moment for a unit load at the midpoint?
  1. A
    M = wL²/4
  2. B
    M = wL/2
  3. C
    M = wL
  4. D
    M = wL²/8
Question 26Single Answer
In a truss used for a ship’s crane, the virtual work method is used to calculate joint displacement. What is the virtual work contribution of a zero-force member?
  1. A
    Non-zero
  2. B
    Equal to the joint load
  3. C
    Equal to the member length
  4. D
    Zero
Question 27Single Answer
A marine beam is subjected to a point load. Using virtual work, what is the deflection at a point away from the load?
  1. A
    Equal to the applied load
  2. B
    Zero
  3. C
    Dependent on the load position
  4. D
    Independent of the load position
Question 28Single Answer
In a marine frame, the virtual work method is used to find rotation at a joint. What is the virtual work contribution of a shear force?
  1. A
    Equal to the frame length
  2. B
    Non-zero
  3. C
    Equal to the shear magnitude
  4. D
    Zero
Question 29Single Answer
A ship’s deck beam is analyzed using virtual work. What is the virtual work done by a distributed load for a unit point load?
  1. A
    Integral of the load times deflection
  2. B
    Zero
  3. C
    Equal to the load magnitude
  4. D
    Equal to the beam length
Question 30Single Answer
In a marine truss, the virtual work method is used to calculate deflection. What is the virtual work contribution of a tensile member?
  1. A
    Zero
  2. B
    Non-zero
  3. C
    Equal to the tensile force
  4. D
    Equal to the member length
Question 31Single Answer
A ship’s propeller rotates at 120 rpm. What is the angular velocity in rad/s?
  1. A
    12.57 rad/s
  2. B
    25.14 rad/s
  3. C
    37.71 rad/s
  4. D
    50.28 rad/s
Question 32Single Answer
A marine winch accelerates a 500 kg load at 2 m/s². What is the force required?
  1. A
    500 N
  2. B
    2000 N
  3. C
    1500 N
  4. D
    1000 N
Question 33Single Answer
A ship’s rudder rotates with an angular acceleration of 0.5 rad/s². If it starts from rest, what is the angular velocity after 4 s?
  1. A
    1 rad/s
  2. B
    3 rad/s
  3. C
    2 rad/s
  4. D
    4 rad/s
Question 34Single Answer
A particle on a ship’s deck moves in a circular path of radius 2 m at 3 rad/s. What is the tangential velocity?
  1. A
    6 m/s
  2. B
    3 m/s
  3. C
    9 m/s
  4. D
    12 m/s
Question 35Single Answer
A marine crane’s arm rotates about a pivot with a constant angular velocity of 0.2 rad/s. What is the linear velocity of a point 5 m from the pivot?
  1. A
    0.5 m/s
  2. B
    1 m/s
  3. C
    1.5 m/s
  4. D
    2 m/s
Question 36Single Answer
A ship’s anchor is dropped with an initial velocity of 5 m/s. What is its velocity after 3 s under gravity (g = 9.81 m/s²)?
  1. A
    14.81 m/s
  2. B
    24.43 m/s
  3. C
    44.43 m/s
  4. D
    34.43 m/s
Question 37Single Answer
A marine platform oscillates with a period of 2 s. What is its angular frequency?
  1. A
    1.57 rad/s
  2. B
    3.14 rad/s
  3. C
    4.71 rad/s
  4. D
    6.28 rad/s
Question 38Single Answer
A ship’s cargo swings as a pendulum with a length of 4 m. What is the period of oscillation (g = 9.81 m/s²)?
  1. A
    4.02 s
  2. B
    2.01 s
  3. C
    1.57 s
  4. D
    6.28 s
Question 39Single Answer
A marine winch pulls a cable with a constant acceleration of 1 m/s². If the initial velocity is 2 m/s, what is the distance traveled in 5 s?
  1. A
    22.5 m
  2. B
    17.5 m
  3. C
    12.5 m
  4. D
    27.5 m
Question 40Single Answer
A ship’s propeller blade experiences a centripetal acceleration of 50 m/s² at a radius of 1.5 m. What is its angular velocity?
  1. A
    5.77 rad/s
  2. B
    7.07 rad/s
  3. C
    8.37 rad/s
  4. D
    10.0 rad/s
Question 41Single Answer
A 1000 kg boat experiences an impulse of 5000 Ns from a collision. What is the change in velocity?
  1. A
    5 m/s
  2. B
    2 m/s
  3. C
    10 m/s
  4. D
    15 m/s
Question 42Single Answer
A marine propeller with a moment of inertia of 50 kg•m² is subjected to an angular impulse of 200 Nms. What is the change in angular velocity?
  1. A
    4 rad/s
  2. B
    2 rad/s
  3. C
    6 rad/s
  4. D
    8 rad/s
Question 43Single Answer
A 500 kg load on a ship is subjected to a 10 kNs impulse. If it was initially at rest, what is its final velocity?
  1. A
    10 m/s
  2. B
    20 m/s
  3. C
    15 m/s
  4. D
    25 m/s
Question 44Single Answer
A ship’s rudder with a moment of inertia of 100 kg•m² experiences a torque of 500 Nm for 2 s. What is the angular velocity change?
  1. A
    5 rad/s
  2. B
    10 rad/s
  3. C
    15 rad/s
  4. D
    20 rad/s
Question 45Single Answer
A marine platform is hit by a wave with an impulse of 2000 Ns. If the platform’s mass is 800 kg, what is the velocity change?
  1. A
    2.5 m/s
  2. B
    1.5 m/s
  3. C
    3.5 m/s
  4. D
    4.5 m/s
Question 46Single Answer
A rotating marine component with a moment of inertia of 20 kg•m² stops due to an angular impulse of 100 Nms. What was its initial angular velocity?
  1. A
    2 rad/s
  2. B
    5 rad/s
  3. C
    4 rad/s
  4. D
    3 rad/s
Question 47Single Answer
A 200 kg object on a ship is subjected to a 3000 Ns impulse at 30° to the horizontal. What is the horizontal velocity change?
  1. A
    7.5 m/s
  2. B
    15 m/s
  3. C
    12.99 m/s
  4. D
    17.32 m/s
Question 48Single Answer
A marine turbine with a moment of inertia of 150 kg•m² is subjected to an angular impulse of 450 Nms. What is the change in angular velocity?
  1. A
    1 rad/s
  2. B
    3 rad/s
  3. C
    2 rad/s
  4. D
    4 rad/s
Question 49Single Answer
A 1000 kg boat collides with a dock, experiencing a 4000 Ns impulse. What is the velocity change if the boat was moving at 2 m/s?
  1. A
    4 m/s
  2. B
    2 m/s
  3. C
    6 m/s
  4. D
    8 m/s
Question 50Single Answer
A ship’s component with a moment of inertia of 80 kg•m² experiences a torque of 400 Nm for 3 s. What is the angular velocity change?
  1. A
    10 rad/s
  2. B
    12 rad/s
  3. C
    18 rad/s
  4. D
    15 rad/s
Important Questions Package

GATE Naval Architecture and Marine Engineering Exam Online Question Bank Package

Buy GATE Naval Architecture and Marine Engineering Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GATE Naval Architecture and Marine Engineering question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.GATE Naval Architecture & Marine Engineering Exam (Only MCQ) - English
Description : 1000 Question With Answer
₹101 [₹500]
2.GATE Naval Architecture & Marine Engineering Exam (Only MCQ) - English
Description : 2000 Question With Answer
₹151 [₹500]
3.GATE Naval Architecture & Marine Engineering Exam (Only MCQ) - English
Description : 2500 Question With Answer
₹171 [₹500]
4.GATE Naval Architecture & Marine Engineering Exam (Only MCQ) - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹550]
5.GATE Naval Architecture & Marine Engineering Exam (Only MCQ) Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹650]
Back to Exam
Question for GATE Naval Architecture & Marine Engineering 2027 - Quiz / Questions / MCQ - Toppersexam