πŸ“š Exam by Category
β–Ύ
Objective Questions

Latest GATE Electrical Engineering Exam Question (Objective Questions), MCQ in English

Subjects : General Aptitude, Engineering Mathematics, Electrical Engineering

Question Bank GATE Electrical Engineering Exam (Only MCQ) - English
Back to Exam

General Aptitude

Question 1Single Answer
Inhaling the smoke from a burning _____ could _____ you quickly.
  1. A
    tire/tier
  2. B
    tire/tyre
  3. C
    tyre/tire
  4. D
    tyre/tier
Question 2Single Answer
Rice, a versatile and inexpensive source of carbohydrate, is a critical component of diet worldwide. Climate change, causing extreme weather, poses a threat to sustained availability of rice. Scientists are working on developing Green Super Rice (GSR), which is resilient under extreme weather conditions yet gives higher yields sustainably.
Which one of the following is the CORRECT logical inference based on the information given in the above passage ?
  1. A
    GSR is an alternative to regular rice, but it grows only in an extreme weather
  2. B
    GSR be used in future in response to adverse effects of climate change
  3. C
    GSR grows in an extreme weather, but the quantity of produce is lesser than regular rice
  4. D
    Regular rice will continue to provide good yields even in extreme weather
Question 3Single Answer
The cost price of 20 articles is the same as the selling price of x articles. If the profit is 25%, then the value of x is :
  1. A
    15
  2. B
    16
  3. C
    18
  4. D
    25
Question 4Single Answer
Pipes P and Q can fill a storage tank full of water in 10 and 6 minutes, respectively. Pipe R draws the water out from the storage tank at a rate of 34 litres per minute. P, Q and R operate at a constant rate. If it takes one hour to completely empty a full storage tank with all the pipes operating simultaneously, what is the capacity of the storage tank (in litres) ?Β 
  1. A
    26.8Β 
  2. B
    60.0Β 
  3. C
    120.0
  4. D
    127.5
Question 5Single Answer
Choose the grammatically correct sentence?
  1. A
    Neither of the robots are functioning properly
  2. B
    Neither robots is functioning properly
  3. C
    Neither of the robot are functioning properly
  4. D
    Neither of the robots is functioning properly

Engineering Mathematics

Question 6Single Answer
Consider the following expression :
where z, y, and t are variables, andΒ  Β is a complex number. The partial differential equation derived from the above expression is
  1. A
  2. B
  3. C
  4. D
Question 7Single Answer
For the equation
the correct description is
  1. A
    an ordinary differential equation of order 3 and degree 2Β 
  2. B
    an ordinary differential equation of order 3 and degree 3Β 
  3. C
    an ordinary differential equation of order 2 and degree 3Β 
  4. D
    an ordinary differential equation of order 3 and degreeΒ 
Question 8Single Answer
The value of (1 + i)12, whereΒ  , is.
  1. A
    – 64 iΒ 
  2. B
    64 i
  3. C
    64Β 
  4. D
    – 64
Question 9Single Answer
If (A=\begin{bmatrix}1&2\3&4\end{bmatrix}), what is (\det(A))?
  1. A
    2
  2. B
    (-2)
  3. C
    5
  4. D
    10
Question 10Single Answer
If (A) is a (3\times3) matrix with (\det(A)=5), what is (\det(2A))?
  1. A
    10
  2. B
    40
  3. C
    20
  4. D
    80

Electrical Engineering

Question 11Single Answer
A 3 ohm resistor is connected across 15 V. The current is:
  1. A
    7.5 A
  2. B
    10 A
  3. C
    5 A
  4. D
    2.5 A
Question 12Single Answer
Two resistors 3 ohm and 5 ohm are in series. Their equivalent resistance is:
  1. A
    12 ohm
  2. B
    16 ohm
  3. C
    8 ohm
  4. D
    4 ohm
Question 13Single Answer
Resistors 6 ohm and 12 ohm are connected in parallel. Equivalent resistance is:
  1. A
    6 ohm
  2. B
    2 ohm
  3. C
    8 ohm
  4. D
    4 ohm
Question 14Single Answer
A 2 microF capacitor operates at 100 Hz. Its reactance magnitude is approximately:
  1. A
    397.89 ohm
  2. B
    795.77 ohm
  3. C
    1591.5 ohm
  4. D
    1193.7 ohm
Question 15Single Answer
For L = 15 mH at 100 Hz, the inductive reactance is approximately:
  1. A
    18.85 ohm
  2. B
    4.7124 ohm
  3. C
    14.137 ohm
  4. D
    9.4248 ohm
Question 16Single Answer
A 11 microF capacitor is charged to 12 V. Energy stored is:
  1. A
    0.396 mJ
  2. B
    0.792 mJ
  3. C
    1.188 mJ
  4. D
    1.584 mJ
Question 17Single Answer
At a node, 6 A enters while 2 A and 4 A leave. The remaining branch current leaving the node is:
  1. A
    0 A
  2. B
    1 A
  3. C
    2 A
  4. D
    -1 A
Question 18Single Answer
A single loop has a 25 V source and series resistors 3 ohm and 8 ohm. Mesh current is:
  1. A
    1.1364 A
  2. B
    2.2727 A
  3. C
    4.5455 A
  4. D
    3.4091 A
Question 19Single Answer
A divider has 3 ohm in series with 6 ohm across 30 V. Open-circuit voltage across 6 is:
  1. A
    20 V
  2. B
    40 V
  3. C
    10 V
  4. D
    30 V
Question 20Single Answer
For a Thevenin resistance calculation, an ideal voltage source is shorted leaving 3 ohm and 8 ohm in parallel. Rth is:
  1. A
    1.0909 ohm
  2. B
    2.1818 ohm
  3. C
    3.2727 ohm
  4. D
    4.3636 ohm
Question 21Single Answer
A network has Vth = 15 V and Rth = 3 ohm. Norton current is:
  1. A
    7.5 A
  2. B
    5 A
  3. C
    10 A
  4. D
    2.5 A
Question 22Single Answer
A resistive network has Thevenin resistance 3 ohm. For maximum power transfer, RL should be:
  1. A
    6 ohm
  2. B
    0 ohm
  3. C
    1.5 ohm
  4. D
    3 ohm
Question 23Single Answer
For Vth = 15 V and Rth = 3 ohm, maximum load power is:
  1. A
    28.125 W
  2. B
    9.375 W
  3. C
    18.75 W
  4. D
    37.5 W
Question 24Single Answer
An RC circuit has R = 2 kohm and C = 2 microF. Time constant is:
  1. A
    2 ms
  2. B
    6 ms
  3. C
    8 ms
  4. D
    4 ms
Question 25Single Answer
An RL circuit has L = 60 mH and R = 3 ohm. Time constant is:
  1. A
    20 ms
  2. B
    10 ms
  3. C
    30 ms
  4. D
    40 ms
Question 26Single Answer
An initially uncharged RC circuit is driven by a 15 V step. Capacitor voltage at one time constant is approximately:
  1. A
    4.7409 V
  2. B
    18.964 V
  3. C
    14.223 V
  4. D
    9.4818 V
Question 27Single Answer
For a series RLC circuit with L=11 mH and C=2 microF, resonant frequency is approximately:
  1. A
    2146.0 Hz
  2. B
    1609.5 Hz
  3. C
    1073.0 Hz
  4. D
    536.51 Hz
Question 28Single Answer
A series RLC circuit has resistance 3 ohm. At resonance, its impedance magnitude is:
  1. A
    6 ohm
  2. B
    Infinite
  3. C
    3 ohm
  4. D
    0 ohm
Question 29Single Answer
A series RLC circuit has R=3 ohm, L=25 mH, C=3 microF. Its quality factor at resonance is approximately:
  1. A
    30.429
  2. B
    15.215
  3. C
    45.644
  4. D
    60.858
Question 30Single Answer
Real power is:
  1. A
    409.2 W
  2. B
    306.9 W
  3. C
    204.6 W
  4. D
    102.3 W
Question 31Single Answer
Power is approximately:
  1. A
    3.099 kW
  2. B
    1.5495 kW
  3. C
    2.3242 kW
  4. D
    0.774746 kW
Question 32Single Answer
A balanced star load is supplied at 385 V line-to-line. Phase voltage is approximately:
  1. A
    111.14 V
  2. B
    222.28 V
  3. C
    444.56 V
  4. D
    333.42 V
Question 33Single Answer
A balanced delta load is connected to a 385 V line. Its phase voltage is:
  1. A
    222.3 V
  2. B
    128.3 V
  3. C
    385 V
  4. D
    666.8 V
Question 34Single Answer
A balanced star has each arm 2 ohm. Equivalent balanced delta arm is:
  1. A
    12 ohm
  2. B
    3 ohm
  3. C
    6 ohm
  4. D
    9 ohm
Question 35Single Answer
A balanced delta has each arm 6 ohm. Equivalent balanced star arm is:
  1. A
    1 ohm
  2. B
    4 ohm
  3. C
    2 ohm
  4. D
    3 ohm
Question 36Single Answer
Mutual inductance is 11 mH and current changes at 60 A/s. Induced mutual emf magnitude is:
  1. A
    1.32 V
  2. B
    0.33 V
  3. C
    0.99 V
  4. D
    0.66 V
Question 37Single Answer
Mutual inductance is approximately:
  1. A
    15.556 mH
  2. B
    7.7782 mH
  3. C
    11.667 mH
  4. D
    3.8891 mH
Question 38Single Answer
The nodal-analysis method is primarily based on:
  1. A
    Faraday's law
  2. B
    Ampere's law
  3. C
    KCL
  4. D
    KVL
Question 39Single Answer
The mesh-analysis method is primarily based on:
  1. A
    KCL
  2. B
    Gauss's law
  3. C
    Coulomb's law
  4. D
    KVL
Question 40Single Answer
A 15 V source in series with 3 ohm is source-transformed) Equivalent current source value is:
  1. A
    7.5 A
  2. B
    5 A
  3. C
    2.5 A
  4. D
    10 A
Question 41Single Answer
An ideal independent voltage source has:
  1. A
    Resistance equal to the load
  2. B
    Zero internal resistance
  3. C
    Negative internal resistance
  4. D
    Infinite internal resistance
Question 42Single Answer
An ideal independent current source has:
  1. A
    Zero internal resistance
  2. B
    Infinite internal resistance
  3. C
    Load-dependent resistance
  4. D
    Unit internal resistance
Question 43Single Answer
While finding Thevenin resistance in a network containing dependent sources, the dependent sources:
  1. A
    Are always open-circuited
  2. B
    Are always short-circuited
  3. C
    Remain active
  4. D
    Are replaced by resistors
Question 44Single Answer
If Zth = 3 + j2 ohm, the load for maximum average power is:
  1. A
    6 ohm
  2. B
    3 + j2 ohm
  3. C
    3 - j2 ohm
  4. D
    2 + j3 ohm
Question 45Single Answer
At ideal series resonance, the power factor of the circuit is:
  1. A
    Unity
  2. B
    Zero
  3. C
    0.5 leading
  4. D
    0.5 lagging
Question 46Single Answer
A 4 ohm resistor is connected across 20 V. The current is:
  1. A
    2.5 A
  2. B
    7.5 A
  3. C
    5 A
  4. D
    10 A
Question 47Single Answer
Two resistors 4 ohm and 7 ohm are in series. Their equivalent resistance is:
  1. A
    11 ohm
  2. B
    16.5 ohm
  3. C
    5.5 ohm
  4. D
    22 ohm
Question 48Single Answer
Resistors 8 ohm and 14 ohm are connected in parallel. Equivalent resistance is:
  1. A
    2.5455 ohm
  2. B
    10.182 ohm
  3. C
    7.6364 ohm
  4. D
    5.0909 ohm
Question 49Single Answer
A 3 microF capacitor operates at 150 Hz. Its reactance magnitude is approximately:
  1. A
    530.52 ohm
  2. B
    707.36 ohm
  3. C
    353.68 ohm
  4. D
    176.84 ohm
Question 50Single Answer
For L = 20 mH at 150 Hz, the inductive reactance is approximately:
  1. A
    18.85 ohm
  2. B
    9.4248 ohm
  3. C
    37.699 ohm
  4. D
    28.274 ohm
Important Questions Package

GATE Electrical Engineering Exam Online Question Bank Package

Buy GATE Electrical Engineering Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in GATE Electrical Engineering question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.GATE Electrical Engineering Exam (Only MCQ) - English
Description : 1000 Question With Answer
β‚Ή101 [β‚Ή500]
2.GATE Electrical Engineering Exam (Only MCQ) - English
Description : 2000 Question With Answer
β‚Ή151 [β‚Ή500]
3.GATE Electrical Engineering Exam (Only MCQ) - English
Description : 3000 Question With Answer
β‚Ή181 [β‚Ή500]
4.GATE Electrical Engineering Exam (Only MCQ) Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
β‚Ή390 [β‚Ή650]
5.GATE Electrical Engineering Exam (Only MCQ) - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
β‚Ή151 [β‚Ή550]
6.GATE Electrical Engineering Exam - English (OLD)
Description : 1200 Question With Answer
β‚Ή101 [β‚Ή500]
Back to Exam
Question for GATE Electrical Engineering 2027 - Quiz / Questions / MCQ - Toppersexam