📚 Exam by Category
▾
Objective Questions

Latest ESE General Studies Exam Question (Objective Questions), MCQ in English

Subjects : General Studies & Engineering Aptitude

Question Bank ESE General Studies & Engineering Aptitude Exam Paper 1 - English
Back to Exam

General Studies & Engineering Aptitude

Question 1Single Answer
Consider the following statements regarding GST :
1. The GST Bill 2014 has the purpose to improve the Value Added Tax on Goods and Services
2. It can be imposed differently in different States
3. It is a Comprehensive Tax imposed nationwide irrespective of any State concerned   
4. It is a significant step in the reform of Indirect Taxation in India
Which of the above statements are correct?
  1. A
    1, 2 and 3                
  2. B
    1, 2 and 4
  3. C
    2, 3 and 4                
  4. D
    1, 3 and 4
Question 2Single Answer
Which of the following methods are considered as most favourable to production organizations liable for Taxation?
1. Straight line method of depreciation
2. Declining balance method of depreciation
3. Sum of the years digits method of depreciation
4. Sinking fund method of depreciation
Select the correct answer using the codes given below:
  1. A
    1 and 2                   
  2. B
    2 and 3
     
  3. C
    3 and 4                   
  4. D
    4 and 1
Question 3Single Answer
Consider the following statements regarding Repo rate:
1. It is the rate at which RBI lends money to Commercial Banks generally against Government Securities
2. It is the rate at which RBI borrows money from Commercial Banks generally against Government Securities
3. It is the rate at which Commercial Banks keep Deposits with RBI
Which of the above statements is/are correct?
  1. A
    1 only
  2. B
    2 only
     
  3. C
    3 only                     
  4. D
    1,2 and 3
Question 4Single Answer
Consider the following statements:
Vision of Digital India launched by Government of India is centred on
1. Digital infrastructure as a utility only to senior citizens
2. Governance and services on demand
3. Digital Empowerment of every citizen Which of the above statements are correct?
 
  1. A
    1, 2 and 3               
  2. B
    1 and 2 only
  3. C
    1 and 3 only                        
  4. D
    2 and 3 only
Question 5Single Answer
The words ‘SatyamevaJayate’ inscribed below the base plate of the Emblem of India have been taken from which one of the following?
  1. A
    Mundaka Upanishad
  2. B
    The Rig Veda
  3. C
    The Bhagavad Gita
  4. D
    Vaalmiiki’sRamaayana
Question 6Single Answer
Which one of the following Committees was set up by the Government of India in September 2014 to restructure the Railways and to suggest ways for resource mobilization ?
  1. A
    BibekDebroy Committee
  2. B
    C. Rangarajan Committee
  3. C
    ParthasarthiShome Committee
  4. D
    Sundar Committee
Question 7Single Answer
The Rotterdam Convention deals with :
  1. A
    Reducing nuclear weapon stockpiles
  2. B
    Limiting the use of toxic chemicals
  3. C
    Protecting the oceans
  4. D
    Banning of human clone experiment
Question 8Single Answer
A pentagonal prism is lying on HP on one of its rectangular faces. When it is cut by a section plane, the largest possible section thereof has
 
  1. A
    Five edges              
  2. B
    Six edges
  3. C
    Seven edges           
  4. D
    Eight edges
Question 9Single Answer
Consider the following tertiary treatment methods for treatment of waste water :
1. Ion-exchange method
2. Reverse osmosis
3. Chemical oxidation method
4. Activated sludge process
Which of the above methods are correct
  1. A
    1, 2 and 4               
  2. B
    1, 3 and 4
  3. C
    2, 3 and 4                
  4. D
    1, 2 and 3
Question 10Single Answer
If a thread is wound around a cone starting from a point on the base, and brought back to the same point, then the shortest possible length of the thread is equal to the :
  1. A
    Diameter of the base of the cone
  2. B
    Slant height of the cone
  3. C
    Largest chord of the development sector
  4. D
    Length of the perpendicular from a corner of the development sector to the opposite edge
Question 11Single Answer
Three hundred Passengers are travelling in white, silver and black cars; each of these cars is carrying 6, 5 and 3 passengers, respectively. If the number of white and silver cars is equal and there is only one black car what is the total number of cars?
  1. A
    52                           
  2. B
    53
  3. C
    54                           
  4. D
    55
Question 12Single Answer
The locus traced by a point moving along a pendulum from one end to another, when the pendulum oscillates, is :
  1. A
    A spiral                   
  2. B
    An involute
  3. C
    A cycloid                
  4. D
    A helix
Question 13Single Answer
The present ages of 3 brothers are in the proportion 3:4:5. After 10 years the sum of their ages will be 78. What are their ages now ?
  1. A
    12, 16 and 20          
  2. B
    15, 20 and 25
  3. C
    21, 28 and 35          
  4. D
    24, 32 and 40
Question 14Single Answer
A total of 324 notes comprising of Rs.20 and Rs. 50 denominations make a sum of Rs. 12,450. The number of Rs. 20 notes is :
  1. A
    200                         
  2. B
    144
  3. C
    125                         
  4. D
    110
Question 15Single Answer
Consider the following factors in making ethical judgment :
1. The motive from which the action springs
2. The nature of the act itself, including the means adopted
3. The resulting consequences
Which of the above factors are correct?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    1, 2 and 3               
  4. D
    2 and 3 only
Question 16Single Answer
If a line is inclined to Vertical Plane and parallel to Horizontal Plane, then which of the following statements is always correct?
  1. A
    True Length = Plane Length
  2. B
    True Length = elevation Length
  3. C
    True Length < Plane Length
  4. D
    Vertical Trace of the line is above the XY plane
Question 17Single Answer
If the radius of a generating circle which is moving inside the directing circle is half of the radius of the directing circle, the curve generated by a point on the circumference of the generating circle is :
  1. A
    A circle                   
  2. B
    An ellipse
  3. C
    A straight line          
  4. D
    A spiral
Question 18Single Answer
If the development of the lateral surface of a cone is a semicircle, then :
  1. A
    The slant height of the cone < diameter of the base of the cone
  2. B
    The slant height of the cone > diameter of the base of the cone
  3. C
    The slant height of the cone = diameter of the base of the cone
  4. D
    The slant height of the cone = radius of the base of the cone
Question 19Single Answer
Five men can paint a building in 20 days, 8 Women can paint the same building in 25 days and 10 Boys can paint it in 30 days. If a team has 2 men, 6 Women and 5 Boys, how long will it take to paint the building?
  1. A
    12 days                   
  2. B
    13 days
  3. C
    14 days
  4. D
    15 days
Question 20Single Answer
The Ethical skills are :
  1. A
    Care of possessions, modesty, posture, self-reliance, tidy appearance
  2. B
    Good behaviour, good manners, good relationships, good environment
  3. C
    Attention, calmness, concentration, self-confidence, self-esteem
  4. D
    Code of conduct, responsibility, efficiency, perseverance, punctuality
Question 21Single Answer
Rajiv spends 40% of his salary on food, 20% on house rent, 10% on entertainment and 10% on conveyance. If his savings at the month end are Rs. 2,000, then his monthly salary is
  1. A
    6,000                      
  2. B
    8,000
  3. C
    10,000                     
  4. D
    12,000
Question 22Single Answer
A group of workers estimate to finish a work in 10 days, but 5 workers could not join the work. If the rest of them finished the work in 12 days, the number of members present in the team originally is
  1. A
    50                           
  2. B
    45
  3. C
    35                           
  4. D
    30
Question 23Single Answer
The solution of the system of equations + y + z = 4, – y + z =0, 2 + y + z = 5 is
  1. A
    = 2, y = 2, z = 0
  2. B
    = 1, y = 4, z = 1
  3. C
    = 2, y = 4, z = 3
  4. D
    = 1, y = 2, z = 1
Question 24Single Answer
A cone is resting with its base on HP. A section plane parallel to VP cuts the cone. The section plane is some distance away from the centre and does not pass through the apex. The true shape of the section is
  1. A
    Hyperbola   
  2. B
    Rectangular Hyperbola
  3. C
    Parabola
  4. D
    Rectangular Parabola
Question 25Single Answer
Consider the following statements regarding Golden Ratio for positive integers
1. It is the ratio of difference of two numbers and the smaller number
2. It is the ratio of sum of two numbers and the smaller number
3. It is the ratio of the sum of two numbers and the larger number Which of the above statements is/are correct?
  1. A
    1, 2 and 3                
  2. B
    3 only
  3. C
    2 only                     
  4. D
    1 only
Question 26Single Answer
For which of the following sectors do comprehensive safety and health statutes, for regulating Occupational Safety and health (OSH) at work places, exist at present in India?
  1. A
    Mining, Factories, Ports and Agriculture
  2. B
    Factories, Mining, Agriculture and Construction
  3. C
    Mining, Factories, ports and Construction
  4. D
    Factories Ports, Agriculture and Construction
Question 27Single Answer
Consider the following statements regarding safety during demolition of a multistory building:
1. Demolition need not proceed storey by storey 2. Floor openings, not used for material chutes, should be enclosed with adequate guard rails.
3. Before demolition starts all lath and loose plaster shall be stripped off throughout the
building
4. Adequate and well-stiffened lateral bracing shall be provided for walls
Which of the above statements are correct?
  1. A
    1, 2 and 3 only        
  2. B
    1 and 4 only
  3. C
    2, 3 and 4 only        
  4. D
    1, 2, 3 and 4
Question 28Single Answer
A clutch has to transmit 200 Nm of torque. Assuming uniform pressure theory and the ratio of outer to inner radii is 2.5, what are the radii for a uniform pressure of 2 MPa with the coefficient of friction of the liner material being 0.4?
  1. A
    35 mm and 50 mm
  2. B
    20 mm and 50 mm
  3. C
    35 mm and 80 mm
  4. D
    20 mm and 80 mm
Question 29Single Answer
Consider the goals of the safety policy of a company, at once designating also the responsibilities and authority for their achievement :
1. Safety of employees and the public at large
2. Efforts to be made to involve all managers, supervisors and employees in the development and implementation of safety procedures
3. Clearing of all caveats that may tell on keeping the morale of the employees high Which of the above statements are correct?
  1. A
    1, 2 and 3                
  2. B
    2 and 3 only
  3. C
    1 and 2 only                        
  4. D
    1 and 3 only
Question 30Single Answer
Which one of the following statements is correct in the development of lateral surfaces of solids?
  1. A
    The development of a right cone is a triangle
  2. B
    Triangulation is the recommended method in the development of a prism
  3. C
    The development of the lateral surface of a right circular cylinder is a rectangle
  4. D
    The elements of an elliptical cone are equal in length
Question 31Single Answer
A 15 kW motor drives a bar of boring machine of 30 mm diameter, twisting it through 0.01 radian, if the shear stress induced is 48 MPa and compressive stress is 57 MPa, the length of the bar whose G = 0.80 × 105MPa is
  1. A
    400 mm                   
  2. B
    350 mm
  3. C
    300 mm                   
  4. D
    250 mm
Question 32Single Answer
Consider the following statements regarding V-belt drive:
1. The groove angle of the sleeve is less than the belt section angle
2. The efficiency of a V-belt drive is higher than that of a flat belt drive
 3. The groove angle is so made that the belt gets wedged in the groove
Which of the above statements are correct?
  1. A
    1, 2 and 3                
  2. B
    1 and 2 only
  3. C
    1 and 3 only                        
  4. D
    2 and 3 only
Question 33Single Answer
The purpose of a boring operation in relation to a drilling operation is to
  1. A
    Drill a hole   
  2. B
    Finish the drilled hole
  3. C
    Correct the drilled hole
  4. D
    Enlarge the drilled hole
Question 34Single Answer
Which of the following types of power have to be pre-justified; and, when the need and occasion arise, must very soon be post-justified?
1. Reward power
2. Coercive power
3. Legitimate power
4. Expert power
5. Referent power
Which of the above statements are correct?
  1. A
    1, 2 and 3                
  2. B
    1, 2 and 5
  3. C
    2, 3 and 4                
  4. D
    3, 4 and 5
Question 35Single Answer
Factors which govern the operating cost of an equipment are:
1. Purchase price of the equipment
2. Depreciation due to regular use
3. Cost of operation, maintenance and repairs Which of the above statements are correct?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    2 and 3 only                        
  4. D
    1, 2 and 3
Question 36Single Answer
Consider the following statements with reference to maintenance and service of the product after delivery to the customer.
1. Reliability analysis uses statistics of failures to estimate, understand and improve the performance of the equipment and its maintenance
2. Reliability analysis records supports or guides the maintenance engineer in improving the performance of the product under service
Which of the above statements is/are correct?
  1. A
    1 only                        
  2. B
    2 only
  3. C
    Both 1 and 2           
  4. D
    Neither 1 nor 2
Question 37Single Answer
The most fundamental attribute of TQM is
  1. A
    Drawing control charts
  2. B
    Having regular purposeful meetings
  3. C
    Meeting ISO 9000 audit requirements
  4. D
    Direct involvement of top maagnement
Question 38Single Answer
Internal audits are used to verify whether:
1. Products conform to technical specifications 2. Quality management systems are effectively implemented
Which of the above statements is/are correct?
  1. A
    1 only                        
  2. B
    2 only
  3. C
    Both 1 and 2           
  4. D
    Neither 1 nor 2
Question 39Single Answer
Which industrial waste is commonly used in construction industry?
  1. A
    Flyash                     
  2. B
    Slag
  3. C
    Sludge                    
  4. D
    Red oxide
Question 40Single Answer
If a square pyramid is freely suspended from one of the corners of its base, then the imaginary line joining that corner with the centre of gravity of the pyramid will be
  1. A
    Inclined at 60° with the vertical
  2. B
    Inclined at 45° with the vertical
  3. C
    Inclined at 30° with the vertical
  4. D
    Vertical
Question 41Single Answer
The maximum percentage defects that a consumer may find definitely acceptable is called
  1. A
    AOQL                     
  2. B
    LTPD
  3. C
    AQL                        
  4. D
    AOQ
Question 42Single Answer
In which one of the following types of industrial activities does the problem of loading and scheduling become more difficult?
  1. A
    Single product continuous
  2. B
    Multi-product continuous
  3. C
    Batch production
  4. D
    Continuous process production
Question 43Single Answer
Ethical issues that can affect an Engineer’s professional and personal life are termed as
  1. A
    Macro-ethics
  2. B
    Micro-ethics
  3. C
    Morals
  4. D
    Rights
Question 44Single Answer
The LEED and GRIHA:
1. Are green building rating systems
2. Issue energy compliance certificate
3. Refer to Global standards
4. Are Indian standards under finalization
Select the correct answer using the codes given below
  1. A
    1 and 2                   
  2. B
    2 and 3
  3. C
    3 and 4                   
  4. D
    1 and 4
Question 45Single Answer
Consider the following statements regarding activated sludge process:
1. Industries prefer activated sludge process as it requires less space, does not produce obnoxious odours and requires less time for waste water treatment compared to trickling filter
2. It requires skilled supervision
3. Biological treatment is enhanced because shock loadings are eliminated
Which of the above statements are correct?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    2 and 3 only                        
  4. D
    1, 2 and 3
Question 46Single Answer
Consider the following statements regarding ozone:
1. It is continuously being produced and destroyed
2. It helps to sustain life on earth
3. It is formed in the atmosphere through photochemical reaction
Which of the above statements are correct?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    2 and 3 only                        
  4. D
    1, 2 and 3
Question 47Single Answer
Consider the following statements regarding solar energy:
1. To encourage the adoption of solar energy production, many State Governments and the Centre have announced plans by way of buy back as well as subsidies for installation
2. Land acquisition of several hectares is a bottleneck in implementing this programme
3. Considerable R & D effort is needed to bring down the cost of P-V cells
Which of the above statements are correct?
  1. A
    1 and 2 only            
  2. B
    1 and 3 only
  3. C
    1, 2 and 3                
  4. D
    2 and 3 only
Question 48Single Answer
If the efficiencies of the boiler, turbine and generator are 85%, 45% and 95% respectively, then the efficiency of the power plant is
  1. A
    75%                        
  2. B
    45%
  3. C
    36.3%                     
  4. D
    28.7%
Question 49Single Answer
Which of the following statements is correct?
  1. A
    The end product of fossil fuels is in the form of electrical energy
  2. B
    Watershed protection increases the rate of surface run-off of water
  3. C
    If timber is over-harvested, the ecological functions of the forest are improved
  4. D
    Rivers change their course during floods and lots of fertile soils are lost to the sea
Question 50Single Answer
Consider the following statements concerning environmental pollution:
1. Nuclear explosions cause radioactive radiation
2. Earthquakes do not cause Tsunamis
3. Acid rain is not a major environmental issue
4. Air pollution has some impact on meteorology Which of the above statements are correct?
  1. A
    1 and 2                   
  2. B
    2 and 3
  3. C
    3 and 4                   
  4. D
    1 and 4
Important Questions Package

ESE General Studies Exam Online Question Bank Package

Buy ESE General Studies Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in ESE General Studies question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.ESE General Studies & Engineering Aptitude Exam Question Bank Book - English
Description : 500 Question with Answer (Printed Material)
₹390 [₹600]
2.ESE PAPER - 1 General Studies & Engineering Aptitude - English
Description : 830 Question with Answer
₹111 [₹500]
Back to Exam