📚 Exam by Category
▾
Objective Questions

Latest DLW Apprentice Exam Question (Objective Questions), MCQ in English

Subjects : English, Mechanical, Hindi, Reasoning, Aptitude, GK

Question Bank DLW Apprentice Exam (Mechanical) - English
Back to Exam

English

Question 1Single Answer
I go to Madurai by —– Vaigai Express
  1. A
    a
  2. B
    an
  3. C
    some
  4. D
    the
Question 2Single Answer
Have the car stolen!
  1. A
    Steal the car
  2. B
    You should have the stolen car
  3. C
    Get someone to steal the car
  4. D
    They have stolen the car
Question 3Single Answer
The payment was collected by the hardworking salesman.
  1. A
    The hardworking salesman collected the payment.
  2. B
    the salesman who worked heard was able to collect the payment.
  3. C
    to collect the payment the salesman had to work hard.
  4. D
    The hardworking salesman was able to collect the payment.
Question 4Single Answer
I had to stop all my work to complete this project.
  1. A
    All other work had to be stopped to complete this project by me
  2. B
    For completing this project all other work must be stopped
  3. C
    For completing this project I had to stop all my work
  4. D
    To complete this project all other work had been stopped by me
Question 5Single Answer
They have published the names of all the successful candidates.
  1. A
    The candidates who have succeeded their names they had published.
  2. B
    The names of all the successful candidates have been published by them
  3. C
    The candidates who have succeeded their names have been published by them.
  4. D
    The names of all the successful candidate were published by them. 
Question 6Single Answer
Passage :
Direction :  Question below has two blanks, each blank indicting that some thing has been omitted. Choose the word for each blank which best fits the meaning of the sentence as a whole.
The Finance Department has ……………a centralized online databank system for all statutory government bodies to …………an eye on their assets and liabilities.
  1. A
     presented , stay
  2. B
    introduced , keep
  3. C
    announce , make
  4. D
    created , let
  5. E
    proclaimed , hold
Question 7Single Answer
Passage :
Direction : The five items in this section consists of a word or group of words followed by four words as (a), (b), (c) and (d). Select the word which is nearly opposite to the meaning of the original word or group of words and mark your response as (a), (b), (c) and (d), as the case may be, in your Answer Sheet.
Assets
  1. A
    liabilities
  2. B
    responsibilities
  3. C
    estates
  4. D
    profits
Question 8Single Answer
Passage :
Direction : In the question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Affidavit
  1. A
     Affirmation
  2. B
    Slander
  3. C
    Oath
  4. D
    Testimony
Question 9Single Answer
Passage :
Direction: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Hollow
  1. A
    Alveolate
  2. B
    Cleft
  3. C
     Cavernous
  4. D
    Solid
Question 10Single Answer
Passage :
Directions: In the following question, out of the four alternatives, choose the word which is opposite in meaning to the given word and click the button corresponding to it
Cosset 
  1. A
    Ignoreb
  2. B
    Close
  3. C
    Caress
  4. D
    Fondle

Mechanical

Question 11Single Answer
A fin will be more effective when Bio number is
  1. A
    Greater than 1
  2. B
    Equal to 1
  3. C
    Between 1 and 3
                   4        4
  4. D
    Less than 1
Question 12Single Answer
A tank of length, breadth and height in the ratio of 2:1:2 is full of water. The ratio of hydrostatic force at the bottom to that at any larger vertical surface is
  1. A
    1
  2. B
    2
  3. C
    3
  4. D
    4
Question 13Single Answer
Which of the following fluids exhibit a certain shear stress at zero shear strain rate followed by a straight line relationship between shear stress and shear strain rate?
  1. A
    Newtonian fluid 
  2. B
    Ideal Bingham plastic fluids
  3. C
    Pseudo-plastic fluids
  4. D
    Dilatent fluids
Question 14Single Answer
What is the specific gravity of a marble stone, which weighs 400N in air, and 200N in water? (g=10m/s2)
  1. A
    8
  2. B
    6
  3. C
    4
  4. D
    2
Question 15Single Answer
What is the intensity of pressure in the following SI units, when specific gravity of mercury is 13.6 and the intensity of pressure is 400KPa ?
  1. A
    0.3 bar or 4.077m of water or 0.29 mm of Hg
  2. B
    4 bar or 5.077m of water or 0.399 mm of Hg
  3. C
    0.3 bar or 5.077m of water or 0.599 mm of Hg
  4. D
    4 bar or 4.077m of water or 0.299 mm of Hg
Question 16Single Answer
Consider the following statements:
1.If a small upward displacement is given to a floating body, it results in the reduction of the buoyant force acting on the body
2.A slight horizontal displacement does not change either the magnitude or the location of the buoyant force 
Which of the above statements is/are correct? 
  1. A
    Both 1 and 2
  2. B
    1 only 
  3. C
    2 only
  4. D
    Neither 1 nor 2 
Question 17Single Answer
State whether following flow field is physically possible? 
  1. A
    Possible for steady, incompressible flow
  2. B
    Possible for unsteady, incompressible flow
  3. C
    Possible for steady, compressible flow 
  4. D
    Not Possible 
Question 18Single Answer
In a differential manometer, a head of 0.5 m of fluid A in limb 1 is found to balance a head of 0.3 m of fluid B in limb 2. The atmospheric pressure is 760 mm of mercury. The ratio of specific gravities of A to B is
  1. A
    0.25
  2. B
    0.26
  3. C
    2
  4. D
    4
Question 19Single Answer
A Reversed Carnot Engine removes 50 kW from a heat sink. The temperature of the heat sink is 250 K and the temperature of the heat reservoir is 300 K. The power required of the engine is
  1. A
    10 kW 
  2. B
    20 kW
  3. C
    30 kW
  4. D
    50 kW
Question 20Single Answer
On which of the following just in time manufacturing philosophy emphasizes ?
  1. A
    man power
  2. B
    profit
  3. C
    inventory
  4. D
    manufacturing
Question 21Single Answer
In a stream line steady flow, two points A and B on a stream line are 1m apart and the flow velocity varies uniformly from 2m/s to 5m/s. What is the acceleration of fluid at B?
  1. A
    3 m/s2
  2. B
    6 m/s2
  3. C
    9 m/s2
  4. D
    15 m/s2
Question 22Single Answer
The stream function is given by Ψ = 3xy, then the velocity at the point (2,3) is
  1. A
    9
  2. B
    -6
  3. C
    117
  4. D
    10.8
Question 23Single Answer
The boundary layer thickness at a given distance from the leading edge of a flat plate is
  1. A
    More for lighter fluid
  2. B
    More for denser fluid
  3. C
    Less for denser fluid
  4. D
    Less for lighter fluid
Question 24Single Answer
In a laminar flow through a circular pipe, the discharge varies
  1. A
    Linearly with fluid density
  2. B
    Inversely with pressure drop
  3. C
    Directly as square of pipe radius
  4. D
    Inversely with fluid velocity
Question 25Single Answer
A fluid is flowing over a flat plate. At distance of 8 cm from the leading edge, the Reynolds number is found to be 25600. The thickness of the boundary layer at this point is
  1. A
    1.5mm
  2. B
    2.5mm
  3. C
    4.0mm
  4. D
    5.0mm
Question 26Single Answer
Air is flowing over a flat plate with a free stream velocity of 24 m/s, and its kinematic viscosity is 72 ×10-6m2/s. If at a particular point, the Reynolds number is 30000, its location from the leading edge is
  1. A
    0.05m 
  2. B
    0.07m
  3. C
    0.08m
  4. D
    0.09m
Question 27Single Answer
In a refrigerator, the evaporator and condenser coil temperatures are –33°C and 27°C, respectively. Assuming that the maximum COP is realized, the required power input for a refrigerating effect of 4 kW is
 
  1. A
    8 kW     
  2. B
    4 kW
  3. C
    2 kW    
  4. D
     1 kW
Question 28Single Answer
In a hydraulic coupling
  1. A
    The magnitudes of input and output torques are equal
  2. B
    The magnitudes of input torque is greater than output torque
  3. C
    The magnitudes of input torque is less than output torque
  4. D
    The magnitudes of input torque is negligible as compared to output torque 
Question 29Single Answer
Consider the following statements:
1.The wheel can be operated freely in air
2.Pressure at the exit of the nozzle is atmospheric
3.Pressure does not vary along the moving vanes
4.Change the direction of momentum imparts thrust over moving vanes Which of the following statements are applied to impulse turbine?
  1. A
    1,2 and 3 only
  2. B
    1,2 and 4 only
  3. C
    3 and 4 only
  4. D
    1,2, 3 and 4 
Question 30Single Answer
A water jet 0.0015m2in area issues from a nozzle with 15 m/s velocity. It is made to impinge perpendicular on to a plate that moves away from the jet with a velocity of 5 m/s. The force on the plate due to this impact is
  1. A
    150 N
  2. B
    1470 N
  3. C
    340 N
  4. D
    900 N

Hindi

Question 31Single Answer
'ऋ' अर् में बदलता है -
  1. A
    गुण संधि के अनुसार   
  2. B
    यण संधि के अनुसार
  3. C
    वृद्धि संधि के अनुसार  
  4. D
    अयादि संधि के अनुसार 
Question 32Single Answer
निम्न में कौनसा नासिक्य व्यंजन है - 
  1. A
    त्
  2. B
    न् 
  3. C
    द् 
  4. D
    भ्
Question 33Single Answer
निम्न में से उत्क्षिप्त व्यंजन है -
  1. A
    ल
  2. B
    ष
  3. C
    ड़
  4. D
    न
Question 34Single Answer
निम्न में से अल्प प्राण नहीं है -
  1. A
    ख
  2. B
    ग
  3. C
    च
  4. D
    द
Question 35Single Answer
तालव्य व्यंजन है-
  1. A
    ट ड द ढ
  2. B
    च छ ज झ
  3. C
    त थ द ध
  4. D
    प फ ब भ
Question 36Single Answer
'अ' स्वर का उच्चारण स्थान क्या है -
  1. A
    मूर्धा
  2. B
    कण्ठ
  3. C
    तालु
  4. D
    ओष्ठ
Question 37Single Answer
निम्लखित मे कंट- तालव्य स्वर कौनसे है ?
  1. A
    ए - ऐ
  2. B
    ए - ओ
  3. C
    ए - ऊ
  4. D
    त - द
Question 38Single Answer
जो धातु या शब्द के अंत में जोड़ा जाता है उसे कहते है ?
  1. A
    समास
  2. B
    अव्यय
  3. C
    उपसर्ग
  4. D
    प्रत्यय
Question 39Single Answer
प्रख्यात में प्रयुक्त उपसर्ग है -
  1. A
    प्र
  2. B
    त
  3. C
    प्रख
  4. D
    आत
Question 40Single Answer
'साखी' शब्द का तत्सम रूप है -
  1. A
    सखी
  2. B
    शाखा
  3. C
    राखी
  4. D
    साक्षी

Reasoning

Question 41Single Answer
How many such pairs of letters are there in the word ‘CLEANLINESS’ each of the which has as many letters between them in the word as they have in the English alphabet, in the same sequence?
  1. A
    Two
  2. B
    Three
  3. C
    Five
  4. D
    Four
  5. E
    None of these
Question 42Single Answer
Team A has scored more goals than Team B
Team C has scored fewer goals than Team B
Team A has scored fewer goals than Team C .
If the first two statements are true, the third statement is
  1. A
    True
  2. B
    False
  3. C
    Uncertain
  4. D
    None
Question 43Single Answer
If it is possible to make only one meaningful word with the second, the third, the sixth and the eight letters of the word FRAGMENT using each only once, which of the following will be the third letter of that word ? If no such word can be formed, give ‘X’ as the answer and if more than one such word can be formed, give ‘Y’ as the answer.
  1. A
    A
  2. B
    E
  3. C
    T
  4. D
    X
  5. E
    Y
Question 44Single Answer
How many such letters are there in the word ORIENTAL each of which is as far away from the beginning of the word as when they are arranged alphabetically?
  1. A
    None            
  2. B
    One         
  3. C
    Two       
  4. D
    Three        
  5. E
    More than three
Question 45Single Answer
How many such pairs of letters in the word CREDIT each of which has as many letters between them in the word as in the English alphabet?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 46Single Answer
How many meaningful words can be made from the letters ‘LMEA’ using each letter only once in each word?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 47Single Answer
If it is possible to make only one meaningful word with the first, the second, the seventh and the eighth letters of the word TEMPORAL, which of the following will be the first letter of that word? If more than one such word can be made, give ‘Y’ as the answer and if no such word can be made, give ‘X’ as the answer.
  1. A
    T
  2. B
    L
  3. C
    E
  4. D
    Y
  5. E
    X
Question 48Single Answer
If the letters of the word HANDOVER are arranged alphabetically from left to right how many letters will remain at the same position?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 49Single Answer
How many such pairs of letters are there in the word EXCURSION, each of which has as many letters between them in the word as they have in the English alphabet?
  1. A
    None
  2. B
    One
  3. C
    Two
  4. D
    Three
  5. E
    More than three
Question 50Single Answer
If it is possible to make only one meaningful word with the first, the second, the third, the sixth and the eighth letters of the word DEVIATION first letter of that word is your answer? If more than one such word can be made formed your answer is ‘A’  and if no such word can be formed your answer is ‘B’.
  1. A
    V
  2. B
    T
  3. C
    E
  4. D
    A
  5. E
    B
Important Questions Package

DLW Apprentice Exam Online Question Bank Package

Buy DLW Apprentice Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in DLW Apprentice question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.DLW Apprentice Exam (Mechanical) - English
Description : 2000 Question with Answer
₹231 [₹500]
2.DLW Apprentice Exam (Mechanical) - Hindi
Description : 2000 Question with Answer
₹231 [₹500]
3.DLW Apprentice Exam (Mechanical) Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
4.DLW Apprentice Exam (Mechanical) Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
Back to Exam