📚 Exam by Category
▾
Objective Questions

Latest CDOT Technician Exam Question (Objective Questions), MCQ in English

Subjects : Mechanical, General Aptitude Test

Question Bank CDOT Technician (Mechanical) Exam - English
Back to Exam

Mechanical

Question 1Single Answer
What is the least count of a Vernier caliper having 20 Vernier scale divisions coinciding with 19 main scale divisions, where 1 main scale division is 1 mm?
  1. A
    0.01 mm
  2. B
    0.05 mm
  3. C
    0.1 mm
  4. D
    0.02 mm
Question 2Single Answer
Which part of a Vernier caliper is used for measuring the depth of a hole?
  1. A
    Main scale
  2. B
    Vernier scale
  3. C
    Jaws
  4. D
    Depth bar
Question 3Single Answer
What is the principle of measurement in a micrometer?
  1. A
    Difference in scale divisions
  2. B
    Screw and nut mechanism
  3. C
    Comparison with a standard
  4. D
    Optical magnification
Question 4Single Answer
What is the least count of a standard metric micrometer?
  1. A
    0.1 mm
  2. B
    0.02 mm
  3. C
    0.01 mm
  4. D
    0.05 mm
Question 5Single Answer
The spindle of a micrometer is attached to which part?
  1. A
    Anvil
  2. B
    Frame
  3. C
    Thimble
  4. D
    Sleeve
Question 6Single Answer
What is the purpose of the ratchet stop in a micrometer?
  1. A
    To lock the measurement
  2. B
    To provide a constant measuring pressure
  3. C
    To rotate the spindle quickly
  4. D
    To ensure uniform measuring pressure
Question 7Single Answer
A wire gauge is used to measure the:
  1. A
    Length of a wire
  2. B
    Resistance of a wire
  3. C
    Diameter of a wire
  4. D
    Current carrying capacity of a wire
Question 8Single Answer
Wire gauges typically measure wire diameter in:
  1. A
    Millimeters
  2. B
    Inches
  3. C
    Standard gauge numbers
  4. D
    Micrometers
Question 9Single Answer
What are slip gauges also known as?
  1. A
    Feeler gauges
  2. B
    Gauge blocks
  3. C
    Radius gauges
  4. D
    Thread gauges
Question 10Single Answer
Slip gauges are made of:
  1. A
    Soft steel
  2. B
    Aluminum
  3. C
    Hardened and ground high-grade steel alloy
  4. D
    Brass
Question 11Single Answer
What is the process of joining slip gauges together for a specific dimension called?
  1. A
    Welding
  2. B
    Soldering
  3. C
    Wringing
  4. D
    Clamping
Question 12Single Answer
The accuracy of slip gauges is typically expressed in terms of:
  1. A
    Surface finish
  2. B
    Hardness
  3. C
    Grade
  4. D
    Weight
Question 13Single Answer
Which of the following measuring instruments has the highest accuracy?
  1. A
    Vernier caliper
  2. B
    Micrometer
  3. C
    Slip gauges
  4. D
    Wire gauge
Question 14Single Answer
What is the main scale division value of a Vernier height gauge if its least count is 0.02 mm and it has 50 Vernier divisions coinciding with 49 main scale divisions?
  1. A
    0.5 mm
  2. B
    1 mm
  3. C
    0.01 mm
  4. D
    0.02 mm
Question 15Single Answer
A feeler gauge is used to measure:
  1. A
    External diameters
  2. B
    Internal diameters
  3. C
    Gaps or clearances between mating parts
  4. D
    Thread pitch
Question 16Single Answer
Feeler gauge blades have specific:
  1. A
    Lengths
  2. B
    Widths
  3. C
    Thicknesses
  4. D
    Materials
Question 17Single Answer
What is a radius gauge used for?
  1. A
    Measuring angles
  2. B
    Measuring straightness
  3. C
    Measuring the radius of curves or fillets
  4. D
    Measuring thread radius
Question 18Single Answer
Radius gauges consist of a set of blades with:
  1. A
    Varying lengths
  2. B
    Varying widths
  3. C
    Different concave and convex radii
  4. D
    Different thicknesses
Question 19Single Answer
What is a thread pitch gauge used for?
  1. A
    Measuring the diameter of a thread
  2. B
    Measuring the length of a thread
  3. C
    Measuring the pitch of a screw thread
  4. D
    Measuring the angle of a thread
Question 20Single Answer
Thread pitch gauges consist of a set of blades with different:
  1. A
    Thread depths
  2. B
    Thread profiles and pitches
  3. C
    Thread angles
  4. D
    Thread lengths
Question 21Single Answer
Which of the following is a direct measuring instrument?
  1. A
    Dial gauge
  2. B
    Steel rule
  3. C
    Comparator
  4. D
    Sine bar
Question 22Single Answer
Which of the following is an indirect measuring instrument?
  1. A
    Micrometer
  2. B
    Vernier caliper
  3. C
    Dial gauge used with a datum surface
  4. D
    Wire gauge
Question 23Single Answer
What is the purpose of a dial gauge?
  1. A
    To measure large dimensions accurately
  2. B
    To measure small linear displacements or variations
  3. C
    To measure angles precisely
  4. D
    To measure surface roughness
Question 24Single Answer
The least count of a dial gauge is typically:
  1. A
    1 mm
  2. B
    0.1 mm
  3. C
    0.01 mm
  4. D
    0.001 mm or 0.01 mm (Commonly 0.01 mm, but some are 0.001 mm)
Question 25Single Answer
What is a comparator used for?
  1. A
    Measuring absolute dimensions
  2. B
    Comparing the dimensions of a workpiece with a standard
  3. C
    Measuring angles accurately
  4. D
    Measuring surface finish
Question 26Single Answer
Which of the following is NOT a type of comparator?
  1. A
    Mechanical comparator
  2. B
    Optical comparator
  3. C
    Electrical comparator
  4. D
    Wire gauge
Question 27Single Answer
What is a sine bar used for?
  1. A
    Measuring straightness
  2. B
    Measuring flatness
  3. C
    Measuring angles accurately
  4. D
    Measuring surface roughness
Question 28Single Answer
A sine bar works on the principle of:
  1. A
    Pythagoras theorem
  2. B
    Trigonometry
  3. C
    Linear interpolation
  4. D
    Vernier scale
Question 29Single Answer
The size of a sine bar is specified by the distance between:
  1. A
    Its length and width
  2. B
    Its height and width
  3. C
    The centers of its rollers
  4. D
    Its overall dimensions
Question 30Single Answer
What is the purpose of a surface roughness measuring instrument?
  1. A
    To measure the overall dimensions of a surface
  2. B
    To check the flatness of a surface
  3. C
    To quantify the texture of a surface
  4. D
    To measure the hardness of a surface
Question 31Single Answer
Which parameter is commonly used to express surface roughness?
  1. A
    Roundness
  2. B
    Cylindricity
  3. C
    Ra (Arithmetic Mean Roughness)
  4. D
    Flatness
Question 32Single Answer
What is the function of a datum in measurement?
  1. A
    To magnify the measurement
  2. B
    To provide a reference for comparison
  3. C
    To provide a fixed reference point or surface for making measurements
  4. D
    To increase the accuracy of the instrument
Question 33Single Answer
In metrology, what does the term "precision" refer to?
  1. A
    The closeness of a measurement to the true value
  2. B
    The repeatability of a measurement
  3. C
    The ability of an instrument to measure small changes
  4. D
    The simplicity of using the instrument
Question 34Single Answer
In metrology, what does the term "accuracy" refer to?
  1. A
    The repeatability of a measurement
  2. B
    The resolution of the instrument
  3. C
    The closeness of a measurement to the true value
  4. D
    The speed of measurement
Question 35Single Answer
What is the difference between tolerance and allowance?
  1. A
    Tolerance is the maximum permissible error, and allowance is the actual error.
  2. B
    Allowance is the total permissible variation in size, and tolerance is the intended difference between mating parts.
  3. C
    Tolerance is the total permissible variation in size, and allowance is the intentional difference between the maximum material limits of mating parts.
  4. D
    There is no difference between tolerance and allowance.
Question 36Single Answer
What is a limit gauge used for?
  1. A
    Measuring the exact size of a part
  2. B
    Checking whether a part's dimension lies within specified limits
  3. C
    Measuring angles
  4. D
    Measuring surface finish
Question 37Single Answer
Which of the following is a type of limit gauge?
  1. A
    Vernier caliper
  2. B
    Micrometer
  3. C
    Go/No-Go gauge
  4. D
    Dial indicator
Question 38Single Answer
What does the "Go" end of a Go/No-Go gauge check?
  1. A
    The maximum permissible size of a hole
  2. B
    The maximum material condition (MMC) of a feature
  3. C
    The minimum material condition (LMC) of a feature
  4. D
    The average size of a feature
Question 39Single Answer
What does the "No-Go" end of a Go/No-Go gauge check?
  1. A
    The maximum permissible size of a shaft
  2. B
    The maximum material condition (MMC) of a feature
  3. C
    The minimum material condition (LMC) of a feature
  4. D
    The average size of a feature
Question 40Single Answer
What is the principle behind optical measurement systems?
  1. A
    Mechanical leverage
  2. B
    Electrical resistance
  3. C
    Light wave properties
  4. D
    Fluid pressure
Question 41Single Answer
Which of the following is an example of an optical measuring instrument?
  1. A
    Vernier bevel protractor
  2. B
    Slip gauge set
  3. C
    Toolmaker's microscope
  4. D
    Feeler gauge set
Question 42Single Answer
A toolmaker's microscope is primarily used for:
  1. A
    Measuring large workpieces
  2. B
    Measuring surface roughness
  3. C
    Precise measurement of small features and dimensions
  4. D
    Measuring hardness of materials
Question 43Single Answer
What is the function of a bevel protractor?
  1. A
    Measuring linear dimensions
  2. B
    Measuring angles
  3. C
    Measuring surface finish
  4. D
    Measuring thread pitch
Question 44Single Answer
What is the least count of a standard Vernier bevel protractor?
  1. A
    1 degree
  2. B
    5 minutes
  3. C
    1 minute
  4. D
    0.1 degree
Question 45Single Answer
What is a coordinate measuring machine (CMM)?
  1. A
    A machine for cutting materials to precise dimensions
  2. B
    A machine used to measure the physical geometrical characteristics of an object
  3. C
    A machine for testing the strength of materials
  4. D
    A machine for assembling electronic components
Question 46Single Answer
CMMs typically use a probe to:
  1. A
    Hold the workpiece
  2. B
    Apply cutting forces
  3. C
    Sense points on the surface of the workpiece
  4. D
    Illuminate the workpiece
Question 47Single Answer
What is the purpose of calibration of measuring instruments?
  1. A
    To make the instrument cheaper
  2. B
    To make the instrument easier to use
  3. C
    To ensure the instrument provides accurate readings by comparing it to a known standard
  4. D
    To increase the size of the instrument
Question 48Single Answer
How often should measuring instruments be calibrated?
  1. A
    Only when they show errors
  2. B
    Once a year
  3. C
    At regular intervals specified by standards or the manufacturer
  4. D
    Every time before use
Question 49Single Answer
What is traceability in measurement?
  1. A
    The ability to easily move the measuring instrument
  2. B
    The record of who used the measuring instrument
  3. C
    The property of a measurement result whereby it can be related to a reference through a documented unbroken chain of calibrations 1
  4. D
    The ability to measure very small dimensions
Question 50Single Answer
What is the unit of measurement for length in the SI system?
  1. A
    Inch
  2. B
    Foot
  3. C
    Meter
  4. D
    Centimeter
Important Questions Package

CDOT Technician Exam Online Question Bank Package

Buy CDOT Technician Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in CDOT Technician question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.CDOT Technician (Mechanical) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
2.CDOT Technician (Mechanical) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
3.CDOT Technician (Mechanical) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
4.CDOT Technician (Mechanical) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
5.CDOT Technician (Electronics/Electronics Communication) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
6.CDOT Technician (Electronics/Electronics Communication) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
7.CDOT Technician (Electronics/Electronics Communication) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
8.CDOT Technician (Electronics/Electronics Communication) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
9.CDOT Technician (Information System/Information Technology) Exam - Hindi
Description : 1000 Question with Answer
₹101 [₹500]
10.CDOT Technician (Information System/Information Technology) Exam - Hindi
Description : 2000 Question with Answer
₹151 [₹500]
11.CDOT Technician (Information System/Information Technology) Exam - English
Description : 1000 Question with Answer
₹101 [₹500]
12.CDOT Technician (Information System/Information Technology) Exam - English
Description : 2000 Question with Answer
₹151 [₹500]
13.CDOT Technician (Mechanical) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
14.CDOT Technician (Electronics/Electronics Communication) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
15.CDOT Technician (Information System/Information Technology) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
16.CDOT Technician (Mechanical) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
17.CDOT Technician (Electronics/Electronics Communication) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
18.CDOT Technician (Information System/Information Technology) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
₹151 [₹450]
19.CDOT Technician (Mechanical) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
20.CDOT Technician (Electronics/Electronics Communication) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
21.CDOT Technician (Information System/Information Technology) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
₹450 [₹800]
22.CDOT Technician (Mechanical) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
23.CDOT Technician (Information System/Information Technology) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
24.CDOT Technician (Electronics/Electronics Communication) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
₹390 [₹600]
Back to Exam
Question for C-DOT Technician 2026 - Quiz / Questions / MCQ - Toppersexam