πŸ“š Exam by Category
β–Ύ
Objective Questions

Latest BTSC Laboratory Assistant Electronics Exam Question (Objective Questions), MCQ in English

Subjects : Electronics

Question Bank BTSC Laboratory Assistant (Electronics) Exam - English
Back to Exam

Electronics

Question 1Single Answer
What is the theoretical limit of the speedup provided by Grover's algorithm for searching an unsorted database of N items?
  1. A
    N
  2. B
    log(N)
  3. C
    sqrt(N)
  4. D
    N2
Question 2Single Answer
What is the total resistance of resistors connected in series?
  1. A
    The reciprocal of the sum of individual resistances.
  2. B
    The sum of the individual resistances.
  3. C
    The product of the individual resistances divided by their sum.
  4. D
    The smallest individual resistance.
Question 3Single Answer
What is the total resistance of resistors connected in parallel?
  1. A
    The sum of the individual resistances.
  2. B
    The product of the individual resistances divided by their sum.
  3. C
    The reciprocal of the sum of the reciprocals of individual resistances.
  4. D
    The largest individual resistance.
Question 4Single Answer
What is the formula for calculating electrical power (P) in a DC circuit?
  1. A
    P = V / I
  2. B
    P = V * I
  3. C
    P = I / V
  4. D
    P = V / R
Question 5Single Answer
What is the energy consumed by a device with a power rating of 100 Watts operating for 1 hour?
  1. A
    100 Joules
  2. B
    1000 Joules
  3. C
    100 Watt-hours
  4. D
    3600 Joules
Question 6Single Answer
What is a voltage source?
  1. A
    A device that provides a constant current.
  2. B
    A device that provides a constant voltage.
  3. C
    A device that opposes the flow of current.
  4. D
    A device that stores electrical energy.
Question 7Single Answer
What is a current source?
  1. A
    A device that provides a constant voltage.
  2. B
    A device that provides a constant current.
  3. C
    A device that stores electrical energy.
  4. D
    A device that dissipates electrical energy.
Question 8Single Answer
What is Kirchhoff's Current Law (KCL)?
  1. A
    The sum of voltages around a closed loop is zero.
  2. B
    The current entering a node is equal to the current leaving the node.
  3. C
    Voltage is directly proportional to current.
  4. D
    Power is equal to the product of voltage and current.
Question 9Single Answer
What is Kirchhoff's Voltage Law (KVL)?
  1. A
    The current entering a node is equal to the current leaving the node.
  2. B
    The sum of voltages around a closed loop is zero.
  3. C
    Current is directly proportional to voltage.
  4. D
    Resistance is equal to voltage divided by current.
Question 10Single Answer
What is the purpose of a capacitor in an electrical circuit?
  1. A
    To store electrical energy in an electric field.
  2. B
    To resist the flow of current.
  3. C
    To provide a path for direct current.
  4. D
    To amplify the voltage.
Question 11Single Answer
What is the purpose of an inductor in an electrical circuit?
  1. A
    To store electrical energy in a magnetic field.
  2. B
    To block the flow of alternating current.
  3. C
    To provide a path for direct current.
  4. D
    To filter out high-frequency signals.
Question 12Single Answer
What is the frequency of a standard AC power supply in India?
  1. A
    50 Hz
  2. B
    60 Hz
  3. C
    100 Hz
  4. D
    120 Hz
Question 13Single Answer
In an AC circuit, what is the term for the opposition to the flow of current?
  1. A
    Resistance
  2. B
    Reactance
  3. C
    Impedance
  4. D
    Conductance
Question 14Single Answer
What is the phase difference between voltage and current in a purely resistive AC circuit?
  1. A
    90 degrees
  2. B
    180 degrees
  3. C
    0 degrees
  4. D
    45 degrees
Question 15Single Answer
What is the phase difference between voltage and current in a purely inductive AC circuit?
  1. A
    Voltage leads current by 90 degrees.
  2. B
    Current leads voltage by 90 degrees.
  3. C
    They are in phase.
  4. D
    They are 180 degrees out of phase.
Question 16Single Answer
What is the phase difference between voltage and current in a purely capacitive AC circuit?
  1. A
    Voltage leads current by 90 degrees.
  2. B
    Current leads voltage by 90 degrees.
  3. C
    They are in phase.
  4. D
    They are 180 degrees out of phase.
Question 17Single Answer
What is the Thevenin's theorem used for in circuit analysis?
  1. A
    To simplify a complex network into a single voltage source and series resistance.
  2. B
    To find the current through a specific branch of a circuit.
  3. C
    To analyze AC circuits.
  4. D
    To calculate the power dissipated in a circuit.
Question 18Single Answer
What does Thevenin's equivalent circuit consist of?
  1. A
    A single current source in parallel with a resistance.
  2. B
    A single voltage source in series with a resistance.
  3. C
    Multiple voltage sources and resistors.
  4. D
    Only resistors.
Question 19Single Answer
How do you find the Thevenin voltage (Vth) across a load in a circuit?
  1. A
    By short-circuiting the load terminals.
  2. B
    By measuring the voltage across the open-circuited load terminals.
  3. C
    By calculating the current through the load.
  4. D
    By applying Kirchhoff's laws to the entire circuit.
Question 20Single Answer
How do you find the Thevenin resistance (Rth) of a circuit?
  1. A
    By removing all voltage sources and short-circuiting all current sources, then finding the equivalent resistance looking into the load terminals.
  2. B
    By measuring the voltage across the load.
  3. C
    By calculating the current through the load.
  4. D
    By adding up all the resistances in the circuit.
Question 21Single Answer
What is Norton's theorem used for in circuit analysis?
  1. A
    To simplify a complex network into a single voltage source and series resistance.
  2. B
    To simplify a complex network into a single current source and parallel resistance.
  3. C
    To analyze transient responses in circuits.
  4. D
    To calculate the power factor of an AC circuit.
Question 22Single Answer
What does Norton's equivalent circuit consist of?
  1. A
    A single voltage source in series with a resistance.
  2. B
    A single current source in parallel with a resistance.
  3. C
    Multiple current sources and resistors.
  4. D
    Only resistors.
Question 23Single Answer
How do you find the Norton current (In) in a circuit?
  1. A
    By measuring the voltage across the open-circuited load terminals.
  2. B
    By measuring the current through the short-circuited load terminals.
  3. C
    By calculating the equivalent resistance.
  4. D
    By applying Kirchhoff's laws to the entire circuit.
Question 24Single Answer
How do you find the Norton resistance (Rn) of a circuit?
  1. A
    By measuring the voltage across the load.
  2. B
    By removing all voltage sources and short-circuiting all current sources, then finding the equivalent resistance looking into the load terminals.
  3. C
    By calculating the current through the load.
  4. D
    By adding up all the resistances in the circuit.
Question 25Single Answer
In a series resonant circuit, the impedance is:
  1. A
    Maximum
  2. B
    Equal to the capacitive reactance
  3. C
    Minimum (equal to the resistance)
  4. D
    Equal to the inductive reactance
Question 26Single Answer
Which device is primarily used to connect multiple networks and route data packets between them?
  1. A
    Switch
  2. B
    Router
  3. C
    Hub
  4. D
    Modem
Question 27Single Answer
Which device is used to connect a local area network (LAN) to the internet?
  1. A
    Router
  2. B
    Switch
  3. C
    Modem
  4. D
    Bridge
Question 28Single Answer
Which of the following devices is used to forward data packets based on MAC addresses?
  1. A
    Router
  2. B
    Switch
  3. C
    Bridge
  4. D
    Hub
Question 29Single Answer
Which of the following is NOT a function of a router?
  1. A
    Assign IP addresses to devices
  2. B
    Forward data packets based on IP address
  3. C
    Forward data packets based on MAC address
  4. D
    Connect different networks
Question 30Single Answer
Which device is used to connect two different networks and operates at the data link layer?
  1. A
    Switch
  2. B
    Router
  3. C
    Bridge
  4. D
    Hub
Question 31Single Answer
Which of the following is the main purpose of a modem?
  1. A
    To connect devices within a network
  2. B
    To connect a local network to the internet
  3. C
    To filter malicious data
  4. D
    To forward data packets
Question 32Single Answer
Which device operates at the physical layer and forwards data in the form of electrical signals?
  1. A
    Router
  2. B
    Hub
  3. C
    Switch
  4. D
    Modem
Question 33Single Answer
Which of the following is used for connecting different network segments and can operate at both the data link and network layers?
  1. A
    Switch
  2. B
    Router
  3. C
    Bridge
  4. D
    Gateway
Question 34Single Answer
Which device divides a large network into smaller subnetworks (subnets)?
  1. A
    Switch
  2. B
    Router
  3. C
    Hub
  4. D
    Modem
Question 35Single Answer
What is the main function of a network switch?
  1. A
    To connect different networks
  2. B
    To forward data packets based on IP addresses
  3. C
    To forward data packets based on MAC addresses
  4. D
    To filter network traffic
Question 36Single Answer
What is the primary function of the CPU (Central Processing Unit)?
  1. A
    To store data permanently
  2. B
    To perform arithmetic and logical operations
  3. C
    To transfer data between different devices
  4. D
    To display output on the monitor
Question 37Single Answer
Which component on the motherboard is responsible for connecting the CPU to the memory and other components?
  1. A
    Northbridge
  2. B
    Southbridge
  3. C
    Power supply
  4. D
    Heat sink
Question 38Single Answer
What type of memory is used to store the BIOS (Basic Input/Output System) in a computer?
  1. A
    RAM
  2. B
    ROM
  3. C
    Flash memory
  4. D
    Cache memory
Question 39Single Answer
Which type of memory is temporary and loses its contents when the power is turned off?
  1. A
    ROM
  2. B
    RAM
  3. C
    Flash memory
  4. D
    EEPROM
Question 40Single Answer
What is the purpose of the motherboard’s chipset?
  1. A
    To store operating system files
  2. B
    To provide power to the CPU
  3. C
    To manage data flow between the CPU, RAM, and other peripherals
  4. D
    To perform calculations
Question 41Single Answer
Which type of memory is faster and located closer to the CPU?
  1. A
    RAM
  2. B
    Cache memory
  3. C
    Hard drive
  4. D
    ROM
Question 42Single Answer
Which component is responsible for cooling the CPU?
  1. A
    Heat sink
  2. B
    RAM
  3. C
    Fan
  4. D
    Power supply
Question 43Single Answer
What is the role of the power supply unit (PSU) in a computer?
  1. A
    To store data
  2. B
    To convert electrical power from the outlet to usable power for the computer
  3. C
    To manage the CPU’s data
  4. D
    To regulate the temperature of the CPU
Question 44Single Answer
Which of the following types of memory is non-volatile and can be electrically erased and reprogrammed?
  1. A
    ROM
  2. B
    RAM
  3. C
    Flash memory
  4. D
    Cache memory
Question 45Single Answer
Which part of the CPU is responsible for fetching instructions from memory?
  1. A
    Control Unit
  2. B
    Arithmetic Logic Unit (ALU)
  3. C
    Register
  4. D
    Cache
Question 46Single Answer
Which device is used to amplify or regenerate signals in a network to extend the distance over which data can travel?
  1. A
    Switch
  2. B
    Router
  3. C
    Repeater
  4. D
    Modem
Question 47Single Answer
Which of the following is used to establish a wireless local area network (WLAN)?
  1. A
    Router
  2. B
    Wireless Access Point (WAP)
  3. C
    Hub
  4. D
    Bridge
Question 48Single Answer
What type of network topology is represented by a central hub that connects all devices in a star configuration?
  1. A
    Ring
  2. B
    Star
  3. C
    Bus
  4. D
    Mesh
Question 49Single Answer
In which network device is the packet switched on the basis of IP address?
  1. A
    Router
  2. B
    Switch
  3. C
    Hub
  4. D
    Modem
Question 50Single Answer
Which network topology connects all devices in a single line, passing data from one device to the next?
  1. A
    Star
  2. B
    Bus
  3. C
    Mesh
  4. D
    Ring
Important Questions Package

BTSC Laboratory Assistant Electronics Exam Online Question Bank Package

Buy BTSC Laboratory Assistant Electronics Important Questions, MCQ, question answer in Hindi & English. It will help you to score high marks in BTSC Laboratory Assistant Electronics question bank 2026 in Online, PDF & Print study material.

+ Free Monthly Current Affairs, GK & more PDF Download
Sr.Package NameAmount
1.BTSC Laboratory Assistant (Electronics) Exam - Hindi
Description : 1000 Question With Answer
β‚Ή121 [β‚Ή500]
2.BTSC Laboratory Assistant (Electronics) Exam - Hindi
Description : 2000 Question With Answer
β‚Ή151 [β‚Ή500]
3.BTSC Laboratory Assistant (Electronics) Exam - Hindi
Description : 3000 Question With Answer
β‚Ή171 [β‚Ή500]
4.BTSC Laboratory Assistant (Electronics) Exam - English
Description : 1000 Question With Answer
β‚Ή121 [β‚Ή500]
5.BTSC Laboratory Assistant (Electronics) Exam - English
Description : 2000 Question With Answer
β‚Ή151 [β‚Ή500]
6.BTSC Laboratory Assistant (Electronics) Exam - English
Description : 2800 Question With Answer
β‚Ή171 [β‚Ή500]
7.BTSC Laboratory Assistant (Electronics) Exam - Hindi
Description : 1000 Question & Answer Download in PDF (Send by Email)
β‚Ή151 [β‚Ή550]
8.BTSC Laboratory Assistant (Electronics) Exam - English
Description : 1000 Question & Answer Download in PDF (Send by Email)
β‚Ή151 [β‚Ή550]
9.BTSC Laboratory Assistant (Electronics) Exam Question Bank Book - Hindi
Description : 1000 Question with Answer (Printed Material)
β‚Ή450 [β‚Ή850]
10.BTSC Laboratory Assistant (Electronics) Exam Question Bank Book - English
Description : 1000 Question with Answer (Printed Material)
β‚Ή390 [β‚Ή650]
Back to Exam